WP7607-1 no RESET_OUT_N pulse on reboot

Legato Linux distribution (Yocto project)
1

We are developing a custom board using a WP7607-1. The board also has a USB3503 and LAN9500A chips. When doing a warm reset (doing a reboot in the shell), the RESET_OUT_N pin is not toggled after reset. This causes the USB chips not to initialize after a reboot. When I insert a WP7502 into the second instead, it works. I can confirm this by seeing a 100-200 ms pulse on the RESET_OUT_N pin. Is this something that isn’t implemented yet in the WP7607-1 firmware? I’m running the latest firmware version:

Device: WP7607-1
IMEI: x
IMEISV: 4
FSN: x
Firmware Version: SWI9X07Y_02.16.02.00 000000 jenkins 2018/04/19 19:59:02
Bootloader Version: SWI9X07Y_02.16.02.00 000000 jenkins 2018/04/19 19:59:02
MCU Version: 002.009
PRI Part Number (PN): 9907364
PRI Revision: 001.003
Carrier PRI Name: GENERIC
Carrier PRI Revision: 002.032_000
SKU: 1103529
Last Reset Cause: Power Down
Resets Count: Expected: 65 Unexpected: 19

2

HI jlu,
this topic should be addressed into the forum dedicated to the WP products.
can you open it there
here is the link https://forum.sierrawireless.com/c/airprime-embedded-wireless-modules/wp-series

Best regards,

3

Thanks, I’ve asked the question there.