Hi, I wanted to change NTC server, so I opened file /etc/time_service.conf (original content) #TIME_SERVICES=“qcom_time ntpd_time” TIME_SERVICES=“qcom_time” NTPD_SERVERS=“ pool.ntp.org ” NTPD_USE_DNS_SERVERS=“n” NTPD_USE_GATEWAY=“n” NTPD_ONESHOT=“y” I changed line from NTPD_SERVERS=“ pool.ntp.…

Hi, I took @lotam advice and sync time manually after data connection is established. In other words. If you want to sync date and time you have to run system("/usr/sbin/ntpd -p <your ntp server here>"); in your code.

Hi, Thanks for reply. First link:Time base is explained but it does say how to change NTP. Second link explains how to turn off time synch (NTP), but again, it does say how to change NTP server. I need to synch time, but I have to synch with specific server

If you understand the explanation, we should at least modify as below, please try and fine tune if you need to modify the remaining USE_DNS or USE_GATEWAY or ONESHOT setting. #TIME_SERVICES=“qcom_time ntpd_time” TIME_SERVICES=“ntpd_time” NTPD_SERVERS=“bleble” NTPD_USE_DNS_SERVERS=“n” NTPD_USE_…

When I change to TIME_SERVICES=“ntpd_time” it does not work at all (even if NTP server is correct). I have tried with all combinations USE_DNS, USE_GATEWAY and ONESHOT. #TIME_SERVICES=“qcom_time ntpd_time” TIME_SERVICES=“ntpd_time” NTPD_SERVERS=“ pool.ntp.org ” NTPD_USE_DNS_SERVERS=“n” NTPD_USE_G…

Update TIME_SERVICES=“ntpd_time” works only if I connect to internet via eth cable. #TIME_SERVICES=“qcom_time ntpd_time” TIME_SERVICES=“ntpd_time” NTPD_SERVERS=“80.153.195.191” NTPD_USE_DNS_SERVERS=“n” NTPD_USE_GATEWAY=“n” NTPD_ONESHOT=“n” I have noticed, date and time is synch without inter…

As mentioned in the link, “qcom_time” make use the cellular network time (NITZ) so it will work and automatic update the system time if the registered carrier network support it. For NTP issue, to my understanding, it will fail and terminate if no IP connectivity when the script run. So maybe your…

[image] TheGod: system(“/usr/sbin/ntpd -p <your ntp server here>”); Hi, I tried using this command to run ntp but still its not working. I tried running sudo dpkg install ntp command , but it is showing dkpg not installed Please guide on how to install dpkg Thanks

Hi @Sahithi , Do you run this command system(“/usr/sbin/ntpd -p <your ntp server here>”); from terminal or use it in your code?

We used it in the code. Here is a screenshot of the code. [Screenshot%20(39)] It still shows the error ‘host name not found’. (The same code works when run on a linux machine.)

Hi, To synch the time you have to establish internet connection (make sure you are connected) and run system(“/usr/sbin/ntpd -p <your ntp server here>”);. End of story. I have got no idea why you want to resolve us.pool.ntp.org , open socket, … etc. If you want to open the socket anyway try 0.us.po…

How to change NTP server

taojiafu January 23, 2019, 7:16am 8

hi
I have the same problem now.
How did you solve it?

Unable to run NTP

Topic		Replies	Views
16.10.3 OS date ( time ) - best way to configure update via ntp	3	1525	October 13, 2017
Automatic time sync Legato Application Framework	19	1676	May 7, 2020
NTP time synchro using Legato API on FX30 Legato Application Framework	4	11	January 26, 2026
Ntpd via cellular data connection Legato Application Framework	2	616	May 28, 2019
Sync Real Time Clock (RTC)	2	1647	December 18, 2017

How to change NTP server

Related topics