Hi, we are trying to set a defined state for a pin to avoid unwanted behaviour on reboot. The current behaviour is that the pin is low after a hard-reset, then set high by one of our applications but on reboot not reset to low. Is there a way to detect a shutdown to reset it during one? The way we’r…

We solved it by implementing a heartbeat to which’s changes the other side listens. This way it’s depending on the change, not a static value and therefore, the value after a reboot doesn’t matter.

_swimcu_gpio_set: illegal operation to set PULL for output pin 2

Legato Application Framework

jyijyi February 21, 2023, 11:33am 2

You can try with some non mcu pin

Topic		Replies	Views
WP76xx not waking up from SPM on GPIO Legato Application Framework	23	555	January 18, 2023
Wake On GPIO error on WP7601, Firmware 12 , Legato 18.10.3 Legato Application Framework	1	581	April 23, 2019
GPIO active low push pull output glitches?	7	487	June 23, 2021
Allow wake up on gpio Legato Application Framework	7	1079	July 13, 2021
Wake up from suspend mode on GPIO interrupt Legato Application Framework	1	1785	February 21, 2018

_swimcu_gpio_set: illegal operation to set PULL for output pin 2

Related topics