After about a day of my WP7601-1 running, the connection to AirVantage is lost and cant be recovered unless I reboot the module. When looking at logread -F, there appears to be the following output stating about some kind of sleep mode? Can anyone confirm if this is normal behavior? [image] I ha…

i don’t see problem. you can try my script and modify the init script: root@fx30:~# cat /home/root/test.sh sleep 30 echo NO_SLEEP > /sys/power/wake_lock root@fx30:~# chmod 777 /home/root/test.sh root@fx30:~# root@fx30:~# cat /etc/init.d/startlegato.sh #!/bin/sh # Copyright (c) Sierra Wireless,…

do you mean you want to keep module waking up? If yes, you can try this: echo NO_SLEEP > /sys/power/wake_lock

I would like to make sure any sleep modes are not enabled. Thank you, I will try this.

[image] jyijyi: NO_SLEEP > /sys/power/wake_lock Looks like I was able to set it. I will let you know how it goes [image]

It looks like when I reboot the module, the setting is not saved. Is this correct? [image]

yes, you need to enter this every boot up

[image] jyijyi: echo NO_SLEEP > /sys/power/wake_lock Could this be implemented in a legato application so this command will run automatically during the init phase of my legato application?

Yes, you can run script in legato application [image] Invoking shell scripts from Legato app Legato Application Framework I don’t see problem on WP76 FW R13. You can use my hello6.tar.gz. hello6.tar.gz (314.7 KB) root@swi-mdm9x28-wp:~# chmod 777 /tmp/test.sh root@swi…

[image] jyijyi: echo NO_SLEEP > /sys/power/wake_lock Hello, I have been struggling with this. I tried the legato app approach that you shared, and I also tried to create a script under init.d. Both are not working, however when I issue the command from the command line, it works as expected. …

[image] jyijyi: sh /home/root/test.sh & Fantastic, thank you, I was first attempting to use the system() api inside a legato app. I then tried to write an init.d script separately echoing NO_SLEEP. You wrote a script in the home folder, then ran that script from existing startlegato.sh. Th…

Loss of connection to AirVantage - only reboot works

Legato Application Framework

jyijyi November 30, 2023, 6:03pm 8

Yes, you can run script in legato application

Topic		Replies	Views
Legato Api not working Legato Application Framework	6	487	July 31, 2020
Power Managment: Suspend on WP7606 Legato Application Framework	14	1039	October 14, 2021
Sleep platform and auto start application Legato Application Framework	2	828	September 22, 2015
Application auto-start at boot on WP8548(Firmware release14) Uncategorized	0	258	April 22, 2021
How to auto reset app or module Legato Application Framework	5	482	April 29, 2022

Loss of connection to AirVantage - only reboot works

Related topics