I don’t see problem, please see below:
root@swi-mdm9x28-wp:~# date
Thu Jan 1 08:08:44 +08 1970
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# /etc/init.d/ntpd_time_service start
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# date
Wed May 6 10:54:21 +08 2020
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# cm info
Device: WP7607
IMEI: 359779081234565
IMEISV: 6
FSN: VN730485080103
[ 199.814275] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x0c1300c8 OPER:0x00000090
Firmware Version: SWI9X07Y_02.28.03.03 000000 jenki[ 199.831380] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0x3a MSTR_STS:0x0c1300c8 OPER:0x00000090
ns 2019/05/21 03:33:04
Bootloader Version: SWI9X07Y_02.28.03.03 000000 jenkins 2019/05/21 03:33:04
MCU Version: 002.011
PRI Part Number (PN): 9908958
PRI Revision: 001.000
Carrier PRI Name: GENERIC
Carrier PRI Revision: 002.068_000
SKU: 1104301
Last Reset Cause: Reset, User Requested
Resets Count: Expected: 112 Unexpected: 5
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# cat /etc/time_service.conf
#TIME_SERVICES=“qcom_time ntpd_time”
TIME_SERVICES=“ntpd_time”
NTPD_SERVERS=“pool.ntp.org”
NTPD_USE_DNS_SERVERS=“n”
NTPD_USE_GATEWAY=“n”
NTPD_ONESHOT=“y”
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# cm data
Index: 1
APN: hkcsl
PDP Type: IPV4V6
Connected: yes
Interface: rmnet_data0
Family[IPv4]: inet
IP[IPv4]: 10.165.58.134
Gateway[IPv4]: 10.165.58.133
Dns1[IPv4]: 10.144.148.129
Dns2[IPv4]: 10.144.148.5
root@swi-mdm9x28-wp:~#
root@swi-mdm9x28-wp:~# ping pool.ntp.org
PING pool.ntp.org (81.2.248.189): 56 data bytes
64 bytes from 81.2.248.189: seq=0 ttl=47 time=433.913 ms
64 bytes from 81.2.248.189: seq=1 ttl=47 time=392.103 ms
^C
— pool.ntp.org ping statistics —
2 packets transmitted, 2 packets received, 0% packet loss
round-trip min/avg/max = 392.103/413.008/433.913 ms
root@swi-mdm9x28-wp:~#