# Wp77xx rebuilding linux

**URL:** <https://forum.legato.io/t/wp77xx-rebuilding-linux/4983>\
**Category:** Legato Linux distribution (Yocto project)\
**Created:** [February 4, 2020, 7:04pm UTC](https://forum.legato.io/t/wp77xx-rebuilding-linux/4983 "2020-02-04T19:04:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![rob](https://avatars.discourse-cdn.com/v4/letter/r/838e76/32.png) [@rob](https://forum.legato.io/u/rob)\
**Post date:** [February 4, 2020, 7:04pm UTC](https://forum.legato.io/t/wp77xx-rebuilding-linux/4983/1 "2020-02-04T19:04:45Z")

</div>

What steps need to be taken to rebuild linux for wp77xx?

---

<div class="post-metadata">

**Author:** ![lotam](https://avatars.discourse-cdn.com/v4/letter/l/958977/32.png) [@lotam](https://forum.legato.io/u/lotam)\
**Post date:** [February 5, 2020, 6:28am UTC](https://forum.legato.io/t/wp77xx-rebuilding-linux/4983/2 "2020-02-05T06:28:47Z")

</div>

Hi rob,

Please get the Yocto Linux package and guide from “Linux Distro Source” section in below link:  
[https://source.sierrawireless.com/resources/airprime/software/wp77xx/wp77xx-firmware-latest-release-components/](https://source.sierrawireless.com/resources/airprime/software/wp77xx/wp77xx-firmware-latest-release-components/)  
(Please make sure your WP77xx is running same software version)

And you may find additional info from previous post in the forum, i.e.

> [@Build yocto/legato 17.08.1](https://forum.legato.io/t/build-yocto-legato-17-08-1/3014/10):
>
> I think its better to build complete image and flash the board. I Followed below steps: source poky/oe-init-build-env build\_bin bitbake linux-quic -c menuconfig bitbake linux-quic -c compile make

Hope it helps.  
Thx