# Ssh tunnel : permission denied

**URL:** <https://forum.legato.io/t/ssh-tunnel-permission-denied/5177>\
**Category:** Legato Application Framework\
**Created:** [April 27, 2020, 2:50pm UTC](https://forum.legato.io/t/ssh-tunnel-permission-denied/5177 "2020-04-27T14:50:54Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\
**Post date:** [April 29, 2020, 11:48pm UTC](https://forum.legato.io/t/ssh-tunnel-permission-denied/5177/9 "2020-04-29T23:48:23Z")

</div>

Disable smack:

> [@Legato framework porting on imx6ull, board rebooting after 40 seconds](https://forum.legato.io/t/legato-framework-porting-on-imx6ull-board-rebooting-after-40-seconds/3669/5):
>
> As per the legato document, fwupdate query used for verifying the target . For that purpose I used that command.As part of verification only legato version and legato status worked.But fwupdate query command did not work. When I debugged the source code , I found that IPC are not up . Legato framework is wating for that for 30 Seconds.

Init script modification:

> [@Adding scripts to run at startup](https://forum.legato.io/t/adding-scripts-to-run-at-startup/2412/7):
>
> I just tried on WP76 R9, I found that modifying mount\_early is not working. Instead I modify /etc/init.d/startlegato.sh, and I can add my command there. case “$1” in start) echo “Legato start sequence 123” echo 123 \> /tmp/123.txt You can have a try there.

---

_[View the full topic](https://forum.legato.io/t/ssh-tunnel-permission-denied/5177)._