# Software update issues

**URL:** <https://forum.legato.io/t/software-update-issues/2618>\
**Category:** Uncategorized\
**Created:** [August 21, 2017, 11:52am UTC](https://forum.legato.io/t/software-update-issues/2618 "2017-08-21T11:52:01Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Aelkhabli](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@Aelkhabli](https://forum.legato.io/u/Aelkhabli)\
**Post date:** [August 21, 2017, 11:52am UTC](https://forum.legato.io/t/software-update-issues/2618/1 "2017-08-21T11:52:01Z")

</div>

Hello,

I have an issue when I try to update my Legato application on a FX30S :

When I send a software update from ssh using “fwupdate download” , I get a download error :

How can I make the update to work?

Thanks

---

<div class="post-metadata">

**Author:** ![murali.nagraj](https://avatars.discourse-cdn.com/v4/letter/m/4da419/32.png) [@murali.nagraj](https://forum.legato.io/u/murali.nagraj)\
**Post date:** [August 21, 2017, 12:06pm UTC](https://forum.legato.io/t/software-update-issues/2618/2 "2017-08-21T12:06:01Z")

</div>

Hi Aelkhabli,  
I don’t think you can install application using the fwupdate. Did you try installing your legato application using instapp ?

If you have not tried with instapp, Please try with the below example command to install the legato application.

instapp update\_file DEST\_IP

update\_file is your application and DEST\_IP is the IP address of the module(FX30S).

Regards,  
Muralidhara N.

---

<div class="post-metadata">

**Author:** ![Aelkhabli](https://avatars.discourse-cdn.com/v4/letter/a/bbe5ce/32.png) [@Aelkhabli](https://forum.legato.io/u/Aelkhabli)\
**Post date:** [August 21, 2017, 12:23pm UTC](https://forum.legato.io/t/software-update-issues/2618/3 "2017-08-21T12:23:21Z")

</div>

Hello ,  
Thank you for your answer, in fact I found the method in this file [[FX30 firmware](https://www.google.fr/url?sa=t&rct=j&q=&esrc=s&source=web&cd=1&cad=rja&uact=8&ved=0ahUKEwjMqc2XqOjVAhVHmBoKHd7vAREQFggqMAA&url=https%3A%2F%2Fsource.sierrawireless.com%2F~%2Fmedia%2Fsupport_downloads%2Fairlink%2Fsoftware%2Ffx30%2Ffx30%2520r13.1.2.004%2520firmware%2520release%2520notes.ashx%3Fla%3Den&usg=AFQjCNHx-sIX68nQxgs6udQ1pLzj_VLkXg)

1. Copy mcu-rmfw-boot-yocto-legato\_wp85.cwe to FX30 filesystem using scp.
2. Open a ssh session
3. Execute fwupdate download mcu-rmfw-boot-yocto-legato\_wp85.cwe

---

<div class="post-metadata">

**Author:** ![murali.nagraj](https://avatars.discourse-cdn.com/v4/letter/m/4da419/32.png) [@murali.nagraj](https://forum.legato.io/u/murali.nagraj)\
**Post date:** [August 21, 2017, 12:33pm UTC](https://forum.legato.io/t/software-update-issues/2618/4 "2017-08-21T12:33:15Z")

</div>

Hi Aelkhabli,  
mcu-rmfw-boot-yocto-legato\_wp85.cwe is not a application file, It’s a firmware. So i was confused when you told “I have an issue when I try to update my Legato application on a FX30S”.  
Are you trying to update .cwe file or .update file ? If you are trying to update .cwe file, then you are doing correct.

Can you please provide the download error if you are trying to update the .cwe file ?

Regards,  
Muralidhara N.
