# httpGet not working, cm data connect failing
**URL:** https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824
**Category:** Legato Application Framework
**Created:** [November 3, 2024, 4:42am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824 "2024-11-03T04:42:46Z")
**Posts on this page:** 8
**Page:** 1
### Author:  [@paul.avalosar](https://forum.legato.io/u/paul.avalosar)
#### Post date: [November 3, 2024, 4:42am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/1 "2024-11-03T04:42:46Z")
Hi, I’m trying to run the httpGet application (and curl as well) with no success so far. My sim provider is aeris.
My cm info is:
```auto
Device: FX30S(WP7702)
IMEI: 354723090692947
IMEISV: 8
FSN: VU252600491010
Firmware Version: SWI9X06Y_02.36.08.09 c094f4 jenkins 2022/06/24 03:14:28
Bootloader Version: SWI9X06Y_02.36.08.09 c094f4 jenkins 2022/06/24 03:14:28
MCU Version: 002.015
PRI Part Number (PN): 9907957
PRI Revision: 001.000
Carrier PRI Name: SIERRA
Carrier PRI Revision: 001.049_000
SKU: 1103882
Last Reset Cause: Power Down
Resets Count: Expected: 37 Unexpected: 1
FX30 Version: R15.1.0.004
```
My cm radio output is:
```auto
root@fx30s:~# cm radio
Power: ON
Current Network Operator: TELCEL
Current RAT: GSM network (LE_MRC_RAT_GSM)
Status: Registered to a roaming network (LE_MRC_REG_ROAMING)
Signal: Good signal strength (3)
PS: Packet Switched Registered to a roaming network (LE_MRC_REG_ROAMING)
```
My cm data is:
```auto
root@fx30s:~# cm data
Index: 1
APN: lp.swir
PDP Type: IPV4V6
Connected: no
```
My cm data connect is:
```auto
root@fx30s:~# curl https://www.google.com
curl: (6) Could not resolve host: www.google.com
root@fx30s:~# cm data connect
Setting up profile 1
Connecting ... ok
No interface, cannot proceed.
```
curl gives:
```auto
root@fx30s:~# curl https://www.google.com
curl: (6) Could not resolve host: www.google.com
```
httpGet logread gives:
```auto
Nov 1 00:32:13 fx30s user.info Legato: INFO | httpGet[23506] | HTTP Get!
Nov 1 00:32:13 fx30s user.info Legato: INFO | httpGet[23506]/httpGetComponent T=main | httpGet.c _httpGetComponent_COMPONENT_INIT() 125 | Requesting connection...
Nov 1 00:32:43 fx30s user.err Legato: =ERR= | httpGet[23506]/httpGetComponent T=main | httpGet.c TimeoutHandler() 47 | Couldn't establish connection after 30 seconds
Nov 1 00:32:43 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsServer.c CloseSessionEventHandler() 1461 | Client 0x23217a8 killed, remove allocated resources
Nov 1 00:32:43 fx30s user.info Legato: INFO | supervisor[1260]/supervisor T=main | proc.c proc_SigChildHandler() 2094 | Process 'httpGet' (PID: 23506) has exited with exit code 1.
Nov 1 00:32:43 fx30s user.warn Legato: -WRN- | supervisor[1260]/supervisor T=main | app.c app_SigChildHandler() 4182 | Process 'httpGet' in app 'httpGet' faulted: Ignored.
Nov 1 00:32:43 fx30s user.info Legato: INFO | supervisor[1260]/supervisor T=main | app.c app_StopComplete() 4881 | app 'httpGet' has stopped.
Nov 1 00:32:43 fx30s user.info Legato: INFO | supervisor[1260]/supervisor T=main | apps.c DeactivateAppContainer() 374 | Application 'httpGet' has stopped.
Nov 1 00:39:09 fx30s user.info Legato: INFO | avcDaemon[1318]/avcDaemon T=main | avcClient.c StopBearer() 826 | Stop bearer 0xe5
Nov 1 00:39:09 fx30s user.info Legato: INFO | avcDaemon[1318]/avcDaemon T=main | avcClient.c StartBearer() 1083 | Start Bearer
Nov 1 00:39:09 fx30s user.info Legato: INFO | avcDaemon[1318]/avcDaemon T=main | avcClient.c avcClient_Connect() 1304 | Starting retry timer of 60 min at index 1
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsTechRank.c dcsTechRank_SelectDataChannel() 229 | Selected channel name 1
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_AddEventHandler() 694 | Adding channel handler for channel 1 of technology cellular
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_AddEventHandler() 737 | Event handler with reference 0xb1b and event ID 0x4171 added
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_Start() 455 | Starting channel 1 of technology cellular by app session with reference (nil)
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_Start() 513 | Initiating technology to start channel 1 for app session (nil), request reference 0x2e5
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsServer.c TryStartTechSession() 1235 | Successfully initiated data channel 1 of technology 1
Nov 1 00:39:09 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcsTech.c dcsTech_Start() 336 | Request to start channel 1 of technology cellular
Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/swiQmi T=main | swiQmi.c swiQmi_CheckResponse() 947 | Sending QMI_WDS_START_NETWORK_INTERFACE_REQ_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=14.[0x0e]
Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le_pa T=main | pa_mdc_qmi.c StartSession() 1975 | Data connection failure Call End provided 11, Code 1018
Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le_pa T=main | pa_mdc_qmi.c StartSession() 1986 | Data connection failure Verbose Call End provided Type 6, Verbose 33
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/swiQmi T=main | swiQmi.c swiQmi_CheckResponse() 947 | Sending QMI_WDS_START_NETWORK_INTERFACE_REQ_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=14.[0x0e]
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le_pa T=main | pa_mdc_qmi.c StartSession() 1975 | Data connection failure Call End provided 11, Code 1018
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le_pa T=main | pa_mdc_qmi.c StartSession() 1986 | Data connection failure Verbose Call End provided Type 6, Verbose 33
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/modemDaemon T=main | le_mdc.c le_mdc_StartSession() 1284 | Get IPv4v6 Async Connection failureV4 11, 1018, 6, 33
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/modemDaemon T=main | le_mdc.c le_mdc_StartSession() 1297 | Get IPv4v6 Async Connection failureV6 11, 1018, 6, 33
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | dcsDaemon[1342]/dcsCellular T=main | dcsCellular.c le_dcsCellular_Start() 1097 | Failed to start cellular connection 1; error: -6
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | dcsDaemon[1342]/dcsCellular T=main | dcsCellular.c le_dcsCellular_Start() 1107 | IPV4 failure reason 11, code 1018
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | dcsDaemon[1342]/dcsCellular T=main | dcsCellular.c le_dcsCellular_Start() 1112 | IPV6 failure reason 11, code 1018
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsCellular T=main | dcsCellular.c le_dcsCellular_RetryConn() 1311 | Cellular connection 1 already maxed out retry allowed (4)
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | dcsDaemon[1342]/dcs T=main | dcsTech.c dcsTech_Start() 369 | Failed to start channel 1; error: -6
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsServer.c ChannelEventHandler() 909 | Received for channel reference 0x4d event Down
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_Stop() 586 | Stopping channel 1 of technology cellular
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcs.c dcs_Stop() 612 | Channel 1 requested to be stopped
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsServer.c TryStopTechSession() 1286 | Successfully initiated stopping active data connection 1 of technology 1
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcsDaemon T=main | dcsServer.c UpdateTechnologyStatus() 1155 | Technology retry timer is already running; wait for next retry
Nov 1 00:39:16 fx30s user.info Legato: INFO | dcsDaemon[1342]/dcs T=main | dcsTech.c dcsTech_Stop() 406 | Request to stop channel 1 of technology cellular
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/swiQmi T=main | swiQmi.c swiQmi_CheckResponse() 947 | Sending QMI_WDS_GET_PKT_STATISTICS_REQ_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=70.[0x46]
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le_pa T=main | pa_mdc_qmi.c pa_mdc_StopSession() 2821 | Bad input parameter
Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/modemDaemon T=main | le_mdc.c le_mdc_StopSession() 1411 | conFailurePtr is NULL
Nov 1 00:39:16 fx30s user.warn Legato: -WRN- | dcsDaemon[1342]/dcsCellular T=main | dcsCellular.c le_dcsCellular_Stop() 1189 | Failed to stop cellular connection 1; error: -6
Nov 1 00:39:16 fx30s user.warn Legato: -WRN- | dcsDaemon[1342]/dcs T=main | dcsTech.c dcsTech_Stop() 430 | Failed to stop channel 1; error: -6
Nov 1 00:39:16 fx30s user.warn Legato: -WRN- | avcDaemon[1318]/avcDaemon T=main | avcClient.c ConnectionStateHandler() 544 | Disconnected from data connection service, current state 0
Nov 1 00:39:16 fx30s user.warn Legato: -WRN- | avcDaemon[1318]/avcDaemon T=main | avcClient.c ConnectionStateHandler() 570 | AVC: Disconnected even though we are not connected
```
---
### Author:  [@jyijyi](https://forum.legato.io/u/jyijyi)
#### Post date: [November 3, 2024, 9:17am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/2 "2024-11-03T09:17:34Z")
Are you able to ping google server?
Seems the data establishment was not successful
> Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/swiQmi T=main | swiQmi.c swiQmi\_CheckResponse() 947 | Sending QMI\_WDS\_START\_NETWORK\_INTERFACE\_REQ\_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=14.[0x0e]
> Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le\_pa T=main | pa\_mdc\_qmi.c StartSession() 1975 | Data connection failure Call End provided 11, Code 1018
> Nov 1 00:39:09 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le\_pa T=main | pa\_mdc\_qmi.c StartSession() 1986 | Data connection failure Verbose Call End provided Type 6, Verbose 33
> Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/swiQmi T=main | swiQmi.c swiQmi\_CheckResponse() 947 | Sending QMI\_WDS\_START\_NETWORK\_INTERFACE\_REQ\_V01 failed: rc=0 (), resp.result=1.[0x01], resp.error=14.[0x0e]
> Nov 1 00:39:16 fx30s user.err Legato: =ERR= | modemDaemon[1376]/le\_pa T=main | pa\_mdc\_qmi.c StartSession() 1975 | Data connection failure Call End provided 11, Code 1018
---
### Author:  [@paul.avalosar](https://forum.legato.io/u/paul.avalosar)
#### Post date: [November 3, 2024, 5:44pm UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/3 "2024-11-03T17:44:10Z")
No it cannot, I tried to ping 8.8.8.8 but it says network is unreachable
---
### Author:  [@jyijyi](https://forum.legato.io/u/jyijyi)
#### Post date: [November 3, 2024, 11:22pm UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/4 "2024-11-03T23:22:54Z")
Then seems to be sim card or nerwork issue
Maybe you can test the sim card with a phone first
---
### Author:  [@paul.avalosar](https://forum.legato.io/u/paul.avalosar)
#### Post date: [November 4, 2024, 6:48pm UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/5 "2024-11-04T18:48:03Z")
It does work on a phone. The problem I’ve found out is the apn is set to lp.swir when it should be set to [iot.aer.net](http://iot.aer.net)
What can I do to change it?
---
### Author:  [@jyijyi](https://forum.legato.io/u/jyijyi)
#### Post date: [November 5, 2024, 1:07am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/6 "2024-11-05T01:07:15Z")
you can type “cm data apn [iot.aer.net](http://iot.aer.net)”
> **[cm - Legato Docs](https://docs.legato.io/latest/toolsTarget_cm.html#toolsTarget_cm_data)**
>
> legato™ is an open source Linux-based embedded platform designed to simplify connected IoT application development
---
### Author:  [@paul.avalosar](https://forum.legato.io/u/paul.avalosar)
#### Post date: [November 5, 2024, 4:37am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/7 "2024-11-05T04:37:28Z")
I’ve changed the apn, but cm data connect kept failing. Needed to do an AT+COPS=3
then cm data connect and then things worked.
What api should I use to make this changes from code? Or how can I automate this changes in a script (cm documentation says that is not advisable tho)
---
### Author:  [@jyijyi](https://forum.legato.io/u/jyijyi)
#### Post date: [November 5, 2024, 4:57am UTC](https://forum.legato.io/t/httpget-not-working-cm-data-connect-failing/6824/8 "2024-11-05T04:57:46Z")
you can try
```auto
echo -ne "AT+COPS=3\\xd\\xa" > /dev/ttyAT
```
You can see here on how to send AT command in unsandboxed legato application:
> **[How to run shell script after boot](https://mangoh.discourse.group/t/how-to-run-shell-script-after-boot/9278/14)**
>
> you can see this document on how to send AT command in unsandboxed legato application: Sending AT command in Legato application.docx (215.2 KB)