# \[FX30S\] Yocto Linux Sources for the FX30S

**URL:** <https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315>\
**Category:** Legato Linux distribution (Yocto project)\
**Created:** [June 6, 2018, 2:45pm UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315 "2018-06-06T14:45:27Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![lsn](https://avatars.discourse-cdn.com/v4/letter/l/bc79bd/32.png) [@lsn](https://forum.legato.io/u/lsn)\
**Post date:** [June 6, 2018, 2:45pm UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/1 "2018-06-06T14:45:27Z")

</div>

Hello,

I want to use yocto to build a custom image for the FX30S.  
I successfully built an image using the sources for the WP85, but I then saw it is not adapted to the FX30S.

I am therefore searching for the FX30S specific sources.  
I tried getting them over legato-spm (v1.5.1), but it seems that no corresponding package are available:

```nohighlight
XXX@XXX:~$ legato-spm -s http://updatesite.sierrawireless.com/packages/Legato/earlyAccess/fx30/16.10.1 -a
Browsing repository content
Browsing repository
========== Available packages ==========
Packages available from http://updatesite.sierrawireless.com/packages/Legato/earlyAccess/fx30/16.10.1

XXX@XXX:~$ legato-spm -s http://updatesite.sierrawireless.com/packages/Legato/earlyAccess/fx30/16.10.1 -i -m "FX30(WP85XX)" -k pdk.64
Refreshing installed packages
Browsing repository content
Browsing repository
========== Install pending packages ==========
Found 0 update site
No value present 

```

Where can I find the yocto project for the FX30S ?

Best Regards,  
Lucas

---

<div class="post-metadata">

**Author:** ![cchenry](https://avatars.discourse-cdn.com/v4/letter/c/a183cd/32.png) [@cchenry](https://forum.legato.io/u/cchenry)\
**Post date:** [June 12, 2018, 7:00pm UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/2 "2018-06-12T19:00:23Z")

</div>

Hi Lucas,  
There was an issue with the server, could you please retry?

Please be aware the version supported by legato-spm is R13.1.3.E02.

BR,  
Chris

---

<div class="post-metadata">

**Author:** ![lsn](https://avatars.discourse-cdn.com/v4/letter/l/bc79bd/32.png) [@lsn](https://forum.legato.io/u/lsn)\
**Post date:** [June 18, 2018, 9:27am UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/3 "2018-06-18T09:27:32Z")

</div>

Hi Chris,

Thanks for the answer, the sources are indeed back on the server.

However, they do not seem to build correctly unless you move the _‘meta-columbia-x’_ folder into the _‘yocto’_ folder.

Lucas

---

<div class="post-metadata">

**Author:** ![cchenry](https://avatars.discourse-cdn.com/v4/letter/c/a183cd/32.png) [@cchenry](https://forum.legato.io/u/cchenry)\
**Post date:** [June 21, 2018, 11:54pm UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/4 "2018-06-21T23:54:58Z")

</div>

Hi Lucas,  
The source code for the official R13.1.3.001 release is available here:

[http://downloads.sierrawireless.com/airlink/FX30/FX30\_WP8548\_full\_R13.1.3.001.tar.gz](http://downloads.sierrawireless.com/airlink/FX30/FX30_WP8548_full_R13.1.3.001.tar.gz)

This might work better for you.

BR,  
Chris

---

<div class="post-metadata">

**Author:** ![lsn](https://avatars.discourse-cdn.com/v4/letter/l/bc79bd/32.png) [@lsn](https://forum.legato.io/u/lsn)\
**Post date:** [June 27, 2018, 9:46am UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/5 "2018-06-27T09:46:32Z")

</div>

Hi Chris,

Thanks you for the link, these source compile fine without having to move anything.

Lucas

---

<div class="post-metadata">

**Author:** ![mjbutsch](https://avatars.discourse-cdn.com/v4/letter/m/779978/32.png) [@mjbutsch](https://forum.legato.io/u/mjbutsch)\
**Post date:** [October 8, 2018, 6:42pm UTC](https://forum.legato.io/t/fx30s-yocto-linux-sources-for-the-fx30s/3315/6 "2018-10-08T18:42:52Z")

</div>

Hello,

Could you point me to instructions for building an image for the FX30S?

I downloaded the newer R14.0.4.002 version, but don’t know what “images” are available or should be used to build.

Thanks,  
Mark