# Fwupdate doesn't work **URL:** \ **Category:** Legato Application Framework\ **Created:** [May 13, 2020, 2:29pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190 "2020-05-13T14:29:29Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 13, 2020, 2:29pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/1 "2020-05-13T14:29:29Z")
Hi, We are trying to use the fwupdate on the wp7702 (fx30 catm) and it output an error (after a fwupdate download and the automatic reboot): root@fx30:~# fwupdate checkStatus Connecting to service … Bad status (Unknown), install not possible. With the swiflash from developper studio our .cwe can be installed without problem We are using the latest code available for the fx30-catm (with legato 18.06.1\_03c5394b4c271c054ae58a494f160e37) Any idea on what is the problem with fwupdate? Best regards, ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 13, 2020, 4:31pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/2 "2020-05-13T16:31:50Z")
Which fw are you going to update from legato 18.6.1? Do you have the full uart debug log begins from “fwupdate download”? ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 14, 2020, 7:14am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/3 "2020-05-14T07:14:48Z")
Hi, I’m trying to upgrade from the official Sierra .cwe available on the website (FX30\_WP77xx\_full\_R9.1.1.013-generic.cwe) to our company FW. Here is the output of the fwupdate checkStatus after the reboot: root@fx30:~# fwupdate checkStatus Connecting to service … Update status: OK. But the FW which run on the FX is still the Sierra FW… Here is the output (from the logread): Jan 6 00:11:54 fx30 user.info Legato: INFO | fwupdateDaemon[922]/le\_pa\_fwupdate T=main | pa\_fwupdate\_qmi.c pa\_fwupdate\_Download() 1242 | Download completed Jan 6 00:11:54 fx30 user.info Legato: INFO | fwupdateDaemon[922]/le\_pa\_fwupdate T=main | pa\_fwupdate\_qmi.c pa\_fwupdate\_Download() 1285 | Download Complete Jan 6 00:11:54 fx30 user.info Legato: INFO | fwupdateDaemon[922]/le\_pa\_fwupdate T=main | pa\_fwupdate\_qmi.c pa\_fwupdate\_Install() 1763 | Install command successful. System resetting. Jan 6 00:11:54 fx30 user.err Legato: =ERR= | fwupdateDaemon[922]/fwupdateDaemon T=main | fwupdateServer.c le\_fwupdate\_InstallAndMarkGood() 444 | !!! Error LE\_OK Jan 6 00:11:54 fx30 user.warn kernel: [351.659058] PSM: Modem oprt mode - 3 Jan 6 00:11:54 fx30 user.info swiapp: qmi\_at\_unsol\_ind\_cb: ind id:33 Jan 6 00:11:54 fx30 user.info swiapp: Received AT command forward request from modem Jan 6 00:11:54 fx30 user.info swiapp: fwdcmd.opcode=11 Jan 6 00:11:54 fx30 user.info swiapp: fwdcmd.name=+CFUN Jan 6 00:11:54 fx30 user.info swiapp: fwdcmd.ntokens=2 Jan 6 00:11:54 fx30 user.info swiapp: Recieved ctrCond: p: 0, S:0, nr: 1 Jan 6 00:11:54 fx30 user.info swiapp: ctrCond signalling complete. Jan 6 00:11:54 fx30 user.info swiapp: AT response Buffer Jan 6 00:11:54 fx30 user.info swiapp: AT Resp-buffer Len 0 Jan 6 00:11:54 fx30 user.info swiapp: sending QMI\_AT\_FWD\_RESP\_AT\_CMD\_REQ\_V01 message Jan 6 00:11:54 fx30 daemon.info init: starting pid 2837, tty ‘’: ‘/etc/init.d/rcK’ After some test I found that both the Sierra FW from the site and and the compiled from source have the same behavior (won’t install a new fw). But the compiled one at least output an error (like the one from the first post) Best regards, ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 14, 2020, 8:56am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/4 "2020-05-14T08:56:32Z")
I think you need to capture the debug log from uart. ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 20, 2020, 9:19am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/6 "2020-05-20T09:19:48Z")
Hi, Sorry for the delay, To sum up, I made some test: - Case 1: I flash with swiflash the fw (available on the website: FX30\_WP77xx\_full\_R9.1.1.013-generic.cwe). I update with fwupdate the fw from the site After the reboot the running fw is still the previous one. - Case 2: I flash with swiflash the fw (available on the website: FX30\_WP77xx\_full\_R9.1.1.013-generic.cwe). I update with fwupdate the fw compiled from source (with leaf profile sync on the cat-m) After the reboot the running fw is still the previous one. - Case 3: Flash all the FW (default downloaded, default compiled, our company fw) with developer studio tool: Legato Recovery Tool After the reboot the running fw is the flashed one. I set the mapuart properly and this is the uart output, after a fwupdate: > **UART Output Case 1** > > [213.921460] UBIFS assert failed in ubifs\_log\_start\_commit at 412 (pid 1972) > rcK: Executing run\_K\_scripts… > Stopping linkmon: no linkmon found; none killed > done > Stopping port\_bridge: no port\_bridge found; none killed > Stopping qmi\_ip: no qmi\_ip\_multiclient found; none killed > Stopping netmgrd: stopped netmgrd (pid 1223) > done > Stopping qmuxd: stopped qmuxd (pid 1164) > done > no QCMAP\_ConnectionManager found; none killed > Stopping fs-scrub-daemon: no fs-scrub-daemon found; none killed > Stopping thermal-engine: stopped thermal-engine (pid 1170) > done > stopped qti (pid 1427) > Stopping reboot daemon: stopped reboot-daemon (pid 1081) > done > [214.934255] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Legato shutdown sequence > Stopping Legato… > DONE. > Finished Legato stop Sequence > stopping time daemon > Stopping time\_services: stopped time\_daemon (pid 645) > done > stopping ntpd > no ntpd found; none killed > Stopping diagrebootapp: stopped diagrebootapp (pid 629) > done > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1391) > done. > Deconfiguring network interfaces… no ntpd found; none killed > done. > Stopping syslogd/klogd: stopped syslogd (pid 611) > stopped klogd (pid 617) > done > Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 1373) > dropbear. > K96mount\_unionfs: RO rootfs fudge allowed. > Stopping system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/K98mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > K98mount\_early: Executing mount\_early\_user\_stop… > K98mount\_early: RO rootfs fudge allowed. > sh: /mnt/flash: unknown operand > K98mount\_early: Executing mount\_early\_legato\_stop… > Can’t get valid SMEM, init DSSD SMEM > Linux sub system 1 > K98mount\_early: Executing mount\_early\_userrw\_stop… > rcK: Executing kill\_all\_proc… > rcK: Executing umount\_fs\_generic… > rcK: Executing print\_shutdown\_msg… > \*\* SYSTEM SHUTDOWN COMPLETE \*\* > The system is going down NOW! > Sent SIGTERM to all processes > [219.321483] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > [219.350546] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > Sent SIGKILL to all processes > Requesting system reboot > [221.320883] reboot: Restarting system > [221.324359] Failed to disable secure wdog debug: -4 > [221.328394] Calling SCM to disable SPMI PMI▒ > ▒oid Bootloader - UART\_DM Initialized!!! > [10] Qseecom Init Done in Appsbl > [10] secure app region addr=0x87900000 size=0x280000[10] TZ App region notif returned with status:0 addr:87900000 size:2621440 > [20] TZ App log region register returned with status:0 addr:82675000 size:4096 > [30] Qseecom TZ Init Done in Appsbl > [30] ERROR: No devinfo partition found > [30] Neither ‘config’ nor ‘frp’ partition found > [40] ERROR: No misc partition found > [1100] SSMEM init OK[1100] ssmem\_get: region 20 not exists[1190] DEBUG: cmdline has root= > [1310] Channel alloc freed > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] MPM 1 irq mapping errored -517 > [0.215792] spmi\_pmic\_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 > [0.231321] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.234495] smd\_channel\_probe\_now: allocation table not initialized > [0.242244] msm\_thermal:msm\_thermal\_dev\_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 > [0.270407] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.273397] msm\_thermal:get\_kernel\_cluster\_info CPU0 topology not initialized. > [0.274318] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274334] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.275039] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.275056] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.275072] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.275085] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.369880] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready. > [0.371774] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.[0.371967] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0d1300c8 OPER:0x00000090 > [0.373858] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > [0.422523] swimcu\_appl\_psm\_duration\_get: return status 0 > [0.422551] swimcu\_pm\_rtc\_restore: invalid PSM elapsed time: 0 > [0.447547] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:3 tx:1) mode:FIFO slv\_addr:0x22 MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.447619] pca953x 4-0022: failed reading register > [0.448686] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv\_addr:0x1a MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.448756] wm8944 4-001a: Failed to read ID register > [0.452770] msm\_bus\_fabric\_init\_driver > [0.467273] SWI ssmem\_framework\_init: SSMEM init OK > [0.656334] scm\_call failed with error code -4 > [0.656355] msm\_audio\_protect\_memory\_region: SCM call failed, scm\_call\_ret -95 tz\_resp 0 > [0.661951] uart\_tx\_gpio is not available > [0.661971] uart\_rx\_gpio is not available > [0.661992] uart\_cts\_gpio is not available > [0.662011] uart\_rfr\_gpio is not available > [0.662853] AXI: get\_pdata(): Error: Client name not found > [0.662864] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.662872] msm\_serial\_hsl\_probe: Bus scaling is disabled > [0.928458] AXI: get\_pdata(): Error: Client name not found > [0.933264] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.942693] msm\_serial\_hsl\_probe: Bus scaling is disabled > [1.000745] sps: BAM device 0x07984000 is not registered yet. > [1.081681] unable to find DT imem DLOAD mode node > [1.085763] unable to find DT imem EDLOAD mode node > [1.090767] unable to find DT imem dload-type node > [1.095257] Failed to disable secure wdog debug: -4 > [1.127221] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information. > [1.135353] sdhci\_msm 7864900.sdhci: sdhci\_msm\_pm\_qos\_parse\_irq: error -22 reading irq cpu > [1.144368] coresight\_event: error registering on panic -38 > [1.153826] coresight-tmc 6025000.tmc: failed to get flush cti > [1.158622] coresight-tmc 6025000.tmc: failed to get reset cti > [1.226264] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.247822] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.255738] wl12xx GPIO: 131 > [1.273196] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.296760] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.305878] calculate\_residency: residency \< 0 for LPM > [1.309981] parse\_cpu\_levels: idx 1 420 > [1.325754] calculate\_residency: residency \< 0 for LPM > [1.329868] parse\_cpu\_levels: idx 2 500 > [1.340137] parse\_cpu\_levels: idx 2 3040 > [1.344076] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.364662] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > cat: can’t open ‘/sys/class/gpio/gpiochip996/label’: No such file or directory > sh: tca6416: unknown operand > cat: can’t open ‘/sys/class/gpio/gpiochip988/label’: No such file or directory > sh: tca6424: unknown operand > ima: setting up IMA subsystem… > ima: feature not supported > The proc node does not exist > mount root fs from partition (rootfs|system) > Non-secure. > [1.543409] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > [1.995503] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > rootfs roothash: 681542d6bab41e8c2f7ddfb6edae36f844b0fb67b38b61a4f789fa7e57e550c1 > rootfs: dev ‘/dev/ubiblock0\_0’ ‘squashfs’ > mount /dev/mapper/rt > rootfs: mounting took 0ms > init started: BusyBox v1.24.1 (2019-01-29 10:47:12 PST) > /etc/init.d/rcS: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing mount\_essential\_fs… > rcS: Executing simple\_network… > rcS: Executing check\_recovery… > /etc/init.d/factory\_default\_recovery.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing run\_S\_scripts… > /etc/rcS.d/S02mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S02mount\_early: Executing mount\_early\_pseudo… > S02mount\_early: Executing mount\_early\_other… > S02mount\_early: Executing mount\_early\_create\_dirs… > S02mount\_early: Executing yaffs2\_kern\_supported\_init… > S02mount\_early: Executing mount\_early\_user\_start… > S02mount\_early: RO rootfs fudge allowed. > S02mount\_early: User is forcing userapp file system to be ubifs. > S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options… > UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/flash > S02mount\_early: UBIFS volume successfully mounted on /mnt/flash > S02mount\_early: Executing mount\_early\_legato\_start… > sh: 200: unknown operand > mount Legato from partition lefwkro > S02mount\_early: Non-secure. > UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: SQUASHFS successfully mounted on /mnt/legato > S02mount\_early: Executing mount\_early\_userrw\_start… > S02mount\_early: Mounting swirw file system as UBIFS > S02mount\_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options… > UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/userrw > S02mount\_early: UBIFS volume successfully mounted on /mnt/userrw > S02mount\_early: swirw mounted to /mnt/userrw > /etc/rcS.d/S03confighw.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S03confighw.sh: Kernel internal entropy pool filler is available, increasing write\_wakeup\_threshold to 3072 > chown: unknown user messagebus > chgrp: unknown group messagebus > Starting system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/S07mount\_unionfs: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S07mount\_unionfs: RO rootfs fudge allowed. > S07mount\_unionfs: Overlay over /etc is allowed > Mounting local filesystems… > [8.594194] UBIFS error (pid: 488): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device > sh: 200: unknown operand > mount modem from partition modem > MTD : Detected block device : /firmware for modem > > UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > Initializing random number generator… > Switching to composition sierra\_dev (1199:68C0) > [9.274943] enable\_store: android\_usb: already disabled > microcom: can’t open ‘/dev/ttyAT’: No such device > Configuring network interfaces… [9.890194] gbam\_connect\_work: gbam\_connect\_work: Bam channel is not ready > [9.957970] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not open > [9.967115] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not opendone. > Starting syslogd/klogd: done > Starting diagrebootapp: done > $Starting qcom\_time: > starting time-daemon > Starting time\_services: done > Legato start sequence > start\_at\_cmux\_le: Starting DS\_MUX: > start\_at\_cmux\_le: UART1\_SERVICE=APP > start\_at\_cmux\_le: DS\_MUX daemon on USB > restart\_at\_uart: NO UART map for AT service > start\_at\_cmux\_le: Done start\_at\_cmux\_le script. > update-ld-cache: Removing stale mount [/etc/ld.so.conf]… > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]… > update-ld-cache: Updating /etc/ld.so.cache … > [12.434881] i2c-msm-v2 78b8000.i2c: msm\_bus\_scale\_register\_client(mstr-id:86):0xb (ok) > [12.484659] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > cp: can’t stat ‘/etc/resolv.conf’: No such file or directory > mount: mounting /tmp/resolv.conf on /etc/resolv.conf failed: N[14.817201] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > o such file or directory > [14.829999] M-Notify: General: 7 > [14.965524] diag: In diag\_send\_feature\_mask\_update, control channel is not open, p: 0, c0fe3904 > [15.231832] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL5 → MultiMedia5 → TERT\_MI2S\_RX Audio Mixer > [16.708296] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL8 → MultiMedia8 → TERT\_MI2S\_RX Audio Mixer > [17.762602] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT\_FM\_TX → INTERNAL\_FM\_TX → SEC\_MI2S\_RX Port Mixer > [17.984369] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL28 > [18.031943] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer → direct → MM\_UL28 > [18.093364] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL29 > [18.125654] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer → direct → MM\_UL29 > [18.191968] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1\_DL → VoiceMMode1 → SEC\_MI2S\_RX\_Voice Mixer > [18.264248] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2\_DL → VoiceMMode2 → SEC\_MI2S\_RX\_Voice Mixer > [18.378755] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.447994] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.520541] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.529221] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.646573] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.701317] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.743163] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.770688] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.800214] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.808844] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.881162] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.889792] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.985679] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.024771] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [19.084293] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.139524] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [19.210425] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL3 MUX > [19.219142] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL3 MUX → direct → MM\_UL3 > [19.260563] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL28 MUX > [19.269370] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL28 MUX → direct → MM\_UL28 > [19.310457] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.319263] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL29 MUX → direct → MM\_UL29 > [19.343257] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → SLIMBUS\_0\_RX Port Mixer > [19.355488] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2\_STUB\_DL → Voice2 Stub → INTERNAL\_BT\_SCO\_RX\_Voice Mixer > [19.369361] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY\_MI2S\_TX > [19.377444] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE\_IN → direct → SENARY\_MI2S\_TX > [19.556743] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM\_0\_RX AANC MUX has no paths > [19.578095] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB\_DTMF\_TX > [19.588120] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX → direct → STUB\_DTMF\_TX > [19.600865] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_RX\_CAPTURE\_TX > [19.613267] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE → direct → STUB\_HOST\_RX\_CAPTURE\_TX > [19.629284] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB\_HOST\_RX\_PLAYBACK\_RX > [19.642219] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB\_HOST\_RX\_PLAYBACK\_RX → direct → CS-VOICE HOST RX PLAYBACK > [19.658429] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_TX\_CAPTURE\_TX > [19.670978] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE → direct → STUB\_HOST\_TX\_CAPTURE\_TX > [19.686958] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB\_HOST\_TX\_PLAYBACK\_RX > [19.699880] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB\_HOST\_TX\_PLAYBACK\_RX → direct → CS-VOICE HOST TX PLAYBACK > [19.729567] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTP > [19.736636] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTP → direct → Lineout\_1 amp > [19.746796] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTN > [19.754316] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTN → direct → Lineout\_3 amp > [19.764355] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Mic Bias > [19.772101] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Mic Bias → direct → IN1 > [19.781320] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Headset Mic > [19.789326] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Headset Mic → direct → Mic Bias > [19.799575] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for MCLK > [19.806737] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route MCLK → direct → Mic Bias > Finished Legato start Sequence > [20.001416] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Starting reboot daemon: done > Starting atreset: done > Starting modem dependent daemons: Load modem done > Starting qmuxd: done > Starting thermal-engine: done > Starting irsc\_util: Starting irsc tool > Failed to open file:/etc/sec\_config > Absent/Invalid config,Default rules apply > Ending irsc tool > done > Starting netmgrd: done > Starting fs-scrub-daemon: done > net.ipv4.conf.default.rp\_filter = 1 > net.ipv4.conf.all.rp\_filter = 1 > rm: can’t remove ‘/var/log/wtmp’: No such file or directory > Starting qmi\_ip: done > starting DNS forwarder and DHCP server: dnsmasq… done. > Starting Dropbear SSH server: DONE > dropbear. > cat: can’t open ‘/sys/devices/virtual/android\_usb/android0/f\_ecm/native\_ethaddr’: No such file or directory > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1331) > done. > Starting port\_bridge: starting DNS forwarder and DHCP server: dnsmasq… done > done. > run\_getty.sh: ttyHSL1 reserved for CONSOLE > [22.678787] adm\_callback: cmd = 0x10322 returned error = 0x16 > [22.683504] adm\_callback: ADM map error, resuming > [22.688348] adm\_memory\_map\_regions: DSP returned error[ADSP\_ERR\_MAX] > > Poky (Yocto Project Reference Distro) 2.2.3 fx30 /dev/ttyHSL1 > > fx30 login: [22.703755] adm\_map\_cal\_data: map did not work! cal\_type 0 ret -68 > [22.709273] map\_memory: map\_cal failed, cal type 10, ret = -19! > [22.727268] adm\_alloc\_cal: cal\_utils\_alloc\_block failed, ret = -19, cal type = 10! > [22.739698] call\_allocs: alloc failed! ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 20, 2020, 9:38am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/7 "2020-05-20T09:38:40Z")
> **UART Output Case 2** > > rcK: Executing run\_K\_scripts… > Stopping linkmon: no linkmon found; none killed > done > Stopping port\_bridge: no port\_bridge found; none killed > Stopping qmi\_ip: no qmi\_ip\_multiclient found; none killed > Stopping netmgrd: stopped netmgrd (pid 1168) > done > Stopping qmuxd: stopped qmuxd (pid 1123) > done > no QCMAP\_ConnectionManager found; none killed > Stopping fs-scrub-daemon: no fs-scrub-daemon found; none killed > Stopping thermal-engine: stopped thermal-engine (pid 1129) > done > stopped qti (pid 1425) > Stopping reboot daemon: stopped reboot-daemon (pid 1085) > done > [976.779491] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Legato shutdown sequence > Stopping Legato… > DONE. > Finished Legato stop Sequence > stopping time daemon > Stopping time\_services: stopped time\_daemon (pid 638) > done > stopping ntpd > no ntpd found; none killed > Stopping diagrebootapp: stopped diagrebootapp (pid 623) > done > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1405) > done. > Deconfiguring network interfaces… no ntpd found; none killed > done. > Stopping syslogd/klogd: stopped syslogd (pid 610) > stopped klogd (pid 617) > done > Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 1365) > dropbear. > K96mount\_unionfs: RO rootfs fudge allowed. > Stopping system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/K98mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > K98mount\_early: Executing mount\_early\_user\_stop… > K98mount\_early: RO rootfs fudge allowed. > sh: /mnt/flash: unknown operand > K98mount\_early: Executing mount\_early\_legato\_stop… > Can’t get valid SMEM, init DSSD SMEM > Linux sub system 1 > K98mount\_early: Executing mount\_early\_userrw\_stop… > rcK: Executing kill\_all\_proc… > rcK: Executing umount\_fs\_generic… > rcK: Executing print\_shutdown\_msg… > \*\* SYSTEM SHUTDOWN COMPLETE \*\* > The system is going down NOW! > Sent SIGTERM to all processes > [981.125554] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > [981.150354] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > Sent SIGKILL to all processes > Requesting system reboot > [983.088720] reboot: Restarting system > [983.092303] Failed to disable secure wdog debug: -4 > [983.096229] Calling SCM to disable SPMI PMI▒\>@▒▒oid Bootloader - UART\_DM Initialized!!! > [10] Qseecom Init Done in Appsbl > [10] secure app region addr=0x87900000 size=0x280000[10] TZ App region notif returned with status:0 addr:87900000 size:2621440 > [20] TZ App log region register returned with status:0 addr:82675000 size:4096 > [30] Qseecom TZ Init Done in Appsbl > [30] ERROR: No devinfo partition found > [30] Neither ‘config’ nor ‘frp’ partition found > [40] ERROR: No misc partition found > [1100] SSMEM init OK[1100] ssmem\_get: region 20 not exists[1190] DEBUG: cmdline has root= > [1310] Channel alloc freed > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] MPM 1 irq mapping errored -517 > [0.215739] spmi\_pmic\_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 > [0.231240] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.234401] smd\_channel\_probe\_now: allocation table not initialized > [0.242178] msm\_thermal:msm\_thermal\_dev\_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 > [0.270317] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.273310] msm\_thermal:get\_kernel\_cluster\_info CPU0 topology not initialized. > [0.274208] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274226] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.274942] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274962] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.274977] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274990] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.369858] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready. > [0.371740] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.[0.371931] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x091343c8 OPER:0x00000090 > [0.373813] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > [0.422518] swimcu\_appl\_psm\_duration\_get: return status 0 > [0.422546] swimcu\_pm\_rtc\_restore: invalid PSM elapsed time: 0 > [0.447578] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:3 tx:1) mode:FIFO slv\_addr:0x22 MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.447653] pca953x 4-0022: failed reading register > [0.448717] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv\_addr:0x1a MSTR\_STS:0x0d1343c8 OPER:0x00000010 > [0.448790] wm8944 4-001a: Failed to read ID register > [0.452816] msm\_bus\_fabric\_init\_driver > [0.467329] SWI ssmem\_framework\_init: SSMEM init OK > [0.656346] scm\_call failed with error code -4 > [0.656366] msm\_audio\_protect\_memory\_region: SCM call failed, scm\_call\_ret -95 tz\_resp 0 > [0.661940] uart\_tx\_gpio is not available > [0.661960] uart\_rx\_gpio is not available > [0.661980] uart\_cts\_gpio is not available > [0.662000] uart\_rfr\_gpio is not available > [0.662859] AXI: get\_pdata(): Error: Client name not found > [0.662869] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.662878] msm\_serial\_hsl\_probe: Bus scaling is disabled > [0.928466] AXI: get\_pdata(): Error: Client name not found > [0.933269] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.942699] msm\_serial\_hsl\_probe: Bus scaling is disabled > [1.000743] sps: BAM device 0x07984000 is not registered yet. > [1.081578] unable to find DT imem DLOAD mode node > [1.085668] unable to find DT imem EDLOAD mode node > [1.090665] unable to find DT imem dload-type node > [1.095158] Failed to disable secure wdog debug: -4 > [1.127118] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information. > [1.135252] sdhci\_msm 7864900.sdhci: sdhci\_msm\_pm\_qos\_parse\_irq: error -22 reading irq cpu > [1.144260] coresight\_event: error registering on panic -38 > [1.153699] coresight-tmc 6025000.tmc: failed to get flush cti > [1.158497] coresight-tmc 6025000.tmc: failed to get reset cti > [1.226145] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.247701] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.255609] wl12xx GPIO: 131 > [1.273206] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.296741] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.305858] calculate\_residency: residency \< 0 for LPM > [1.309955] parse\_cpu\_levels: idx 1 420 > [1.325752] calculate\_residency: residency \< 0 for LPM > [1.329865] parse\_cpu\_levels: idx 2 500 > [1.340139] parse\_cpu\_levels: idx 2 3040 > [1.344079] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.361293] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > cat: can’t open ‘/sys/class/gpio/gpiochip996/label’: No such file or directory > sh: tca6416: unknown operand > cat: can’t open ‘/sys/class/gpio/gpiochip988/label’: No such file or directory > sh: tca6424: unknown operand > ima: setting up IMA subsystem… > ima: feature not supported > The proc node does not exist > mount root fs from partition (rootfs|system) > Non-secure. > [1.543431] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > [1.995501] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > rootfs roothash: 681542d6bab41e8c2f7ddfb6edae36f844b0fb67b38b61a4f789fa7e57e550c1 > rootfs: dev ‘/dev/ubiblock0\_0’ ‘squashfs’ > mount /dev/mapper/rt > rootfs: mounting took 0ms > init started: BusyBox v1.24.1 (2019-01-29 10:47:12 PST) > /etc/init.d/rcS: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing mount\_essential\_fs… > rcS: Executing simple\_network… > rcS: Executing check\_recovery… > /etc/init.d/factory\_default\_recovery.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing run\_S\_scripts… > /etc/rcS.d/S02mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S02mount\_early: Executing mount\_early\_pseudo… > S02mount\_early: Executing mount\_early\_other… > S02mount\_early: Executing mount\_early\_create\_dirs… > S02mount\_early: Executing yaffs2\_kern\_supported\_init… > S02mount\_early: Executing mount\_early\_user\_start… > S02mount\_early: RO rootfs fudge allowed. > S02mount\_early: User is forcing userapp file system to be ubifs. > S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options… > UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/flash > S02mount\_early: UBIFS volume successfully mounted on /mnt/flash > S02mount\_early: Executing mount\_early\_legato\_start… > sh: 200: unknown operand > mount Legato from partition lefwkro > S02mount\_early: Non-secure. > UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: SQUASHFS successfully mounted on /mnt/legato > S02mount\_early: Executing mount\_early\_userrw\_start… > S02mount\_early: Mounting swirw file system as UBIFS > S02mount\_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options… > UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/userrw > S02mount\_early: UBIFS volume successfully mounted on /mnt/userrw > S02mount\_early: swirw mounted to /mnt/userrw > /etc/rcS.d/S03confighw.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S03confighw.sh: Kernel internal entropy pool filler is available, increasing write\_wakeup\_threshold to 3072 > chown: unknown user messagebus > chgrp: unknown group messagebus > Starting system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/S07mount\_unionfs: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S07mount\_unionfs: RO rootfs fudge allowed. > S07mount\_unionfs: Overlay over /etc is allowed > Mounting local filesystems… > [8.568574] UBIFS error (pid: 488): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device > sh: 200: unknown operand > mount modem from partition modem > MTD : Detected block device : /firmware for modem > > UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > Initializing random number generator… > Switching to composition sierra\_dev (1199:68C0) > [9.241559] enable\_store: android\_usb: already disabled > microcom: can’t open ‘/dev/ttyAT’: No such device > Configuring network interfaces… [9.856692] gbam\_connect\_work: gbam\_connect\_work: Bam channel is not ready > done. > [9.941251] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not open > [9.950366] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not openStarting syslogd/klogd: done > Starting diagrebootapp: done > $Starting qcom\_time: > starting time-daemon > Starting time\_services: done > Legato start sequence > start\_at\_cmux\_le: Starting DS\_MUX: > restart\_at\_uart: NO UART map for AT service > start\_at\_cmux\_le: UART1\_SERVICE=APP > start\_at\_cmux\_le: DS\_MUX daemon on USB > start\_at\_cmux\_le: Done start\_at\_cmux\_le script. > update-ld-cache: Removing stale mount [/etc/ld.so.conf]… > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]… > update-ld-cache: Updating /etc/ld.so.cache … > [12.419805] i2c-msm-v2 78b8000.i2c: msm\_bus\_scale\_register\_client(mstr-id:86):0xb (ok) > [12.472450] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > cp: can’t stat ‘/etc/resolv.conf’: No such file or directory > mount: mounting /tmp/resolv.conf on /etc/resolv.conf failed: N[14.796001] M-Notify: General: 7 > o such file or directory > [14.831621] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL5 → MultiMedia5 → TERT\_MI2S\_RX Audio Mixer > [14.854491] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL8 → MultiMedia8 → TERT\_MI2S\_RX Audio Mixer > [14.875289] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT\_FM\_TX → INTERNAL\_FM\_TX → SEC\_MI2S\_RX Port Mixer > [14.924694] diag: In diag\_send\_feature\_mask\_update, control channel is not open, p: 0, c0fe3904 > [15.059033] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL28 > [15.259529] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer → direct → MM\_UL28 > [16.341077] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL29 > [16.348486] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer → direct → MM\_UL29 > [17.946285] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1\_DL → VoiceMMode1 → SEC\_MI2S\_RX\_Voice Mixer > [17.997609] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2\_DL → VoiceMMode2 → SEC\_MI2S\_RX\_Voice Mixer > [18.055980] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.120614] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.196968] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.246186] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.313913] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.347647] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.449242] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.534445] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.618817] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.671664] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.727542] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.752907] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.786606] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.811061] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.860916] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.869546] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.961668] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL3 MUX > [19.009811] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL3 MUX → direct → MM\_UL3 > [19.075011] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL28 MUX > [19.122349] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL28 MUX → direct → MM\_UL28 > [19.172617] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.210206] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL29 MUX → direct → MM\_UL29 > [19.238722] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → SLIMBUS\_0\_RX Port Mixer > [19.291133] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2\_STUB\_DL → Voice2 Stub → INTERNAL\_BT\_SCO\_RX\_Voice Mixer > [19.318908] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY\_MI2S\_TX > [19.338689] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE\_IN → direct → SENARY\_MI2S\_TX > [19.549794] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM\_0\_RX AANC MUX has no paths > [19.574695] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB\_DTMF\_TX > [19.584718] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX → direct → STUB\_DTMF\_TX > [19.597474] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_RX\_CAPTURE\_TX > [19.609866] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE → direct → STUB\_HOST\_RX\_CAPTURE\_TX > [19.625971] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB\_HOST\_RX\_PLAYBACK\_RX > [19.638764] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB\_HOST\_RX\_PLAYBACK\_RX → direct → CS-VOICE HOST RX PLAYBACK > [19.655025] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_TX\_CAPTURE\_TX > [19.667602] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE → direct → STUB\_HOST\_TX\_CAPTURE\_TX > [19.683573] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB\_HOST\_TX\_PLAYBACK\_RX > [19.696489] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB\_HOST\_TX\_PLAYBACK\_RX → direct → CS-VOICE HOST TX PLAYBACK > [19.727561] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTP > [19.734640] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTP → direct → Lineout\_1 amp > [19.744799] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTN > [19.752610] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTN → direct → Lineout\_3 amp > [19.762356] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Mic Bias > [19.770123] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Mic Bias → direct → IN1 > [19.779046] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Headset Mic > [19.787624] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Headset Mic → direct → Mic Bias > [19.797083] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for MCLK > [19.804916] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route MCLK → direct → Mic Bias > Finished Legato start Sequence > [19.988665] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Starting reboot daemon: done > Starting atreset: done > Starting modem dependent daemons: Load modem done > Starting qmuxd: done > Starting thermal-engine: done > Starting irsc\_util: Starting irsc tool > Failed to open file:/etc/sec\_config > Absent/Invalid config,Default rules apply > Ending irsc tool > done > Starting netmgrd: done > Starting fs-scrub-daemon: done > net.ipv4.conf.default.rp\_filter = 1 > net.ipv4.conf.all.rp\_filter = 1 > rm: can’t remove ‘/var/log/wtmp’: No such file or directory > Starting qmi\_ip: done > starting DNS forwarder and DHCP server: dnsmasq… done. > Starting Dropbear SSH server: DONE > dropbear. > cat: can’t open ‘/sys/devices/virtual/android\_usb/android0/f\_ecm/native\_ethaddr’: No such file or directory > stopping DNS forwarder and DHCP server: dnsmasq… Starting port\_bridge: stopped /usr/bin/dnsmasq (pid 1331) > done. > done > starting DNS forwarder and DHCP server: dnsmasq… done. > run\_getty.sh: ttyHSL1 reserved for CONSOLE > > Poky (Yocto Project Reference Distro) 2.2.3 fx30 /dev/ttyHSL1 > > fx30 login: [22.733393] adm\_callback: cmd = 0x10322 returned error = 0x16 > [22.738110] adm\_callback: ADM map error, resuming > [22.742942] adm\_memory\_map\_regions: DSP returned error[ADSP\_ERR\_MAX] > [22.749134] adm\_map\_cal\_data: map did not work! cal\_type 0 ret -68 > [22.764777] map\_memory: map\_cal failed, cal type 10, ret = -19! > [22.770633] adm\_alloc\_cal: cal\_utils\_alloc\_block failed, ret = -19, cal type = 10! > [22.777225] call\_allocs: alloc failed! Best regards, ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 20, 2020, 12:08pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/8 "2020-05-20T12:08:07Z")
What is the current value for at!mapuart? I don’t see any message about copying the image to corresponding partition. Btw, can you try AVMS FW update and see it is ok? ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 20, 2020, 12:10pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/9 "2020-05-20T12:10:07Z")
I’m sorry but what is the AVMS FW update and how can I use it? ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 20, 2020, 12:14pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/10 "2020-05-20T12:14:52Z")
It is cloud platform for fw update over air. Please see here [https://source.sierrawireless.com/airvantage/fota/](https://source.sierrawireless.com/airvantage/fota/) ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 20, 2020, 12:22pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/11 "2020-05-20T12:22:36Z")
Uart port configuration: AT!MAPUART? !MAPUART: 17,16 OK I receive all the uart frames on the UART2 ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 20, 2020, 4:22pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/12 "2020-05-20T16:22:34Z")
I launch an update from airvantage from the fw downloadedon the site (generic) to the verizon FW available on airvantage. And the FW running ont the FX is still the generic one. > **UART output GenericToVerizon** > > [20662.346998] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0c1300c8 OPER:0x00000090 > rcK: Executing run\_K\_scripts… > Stopping linkmon: no linkmon found; none killed > done > Stopping port\_bridge: no port\_bridge found; none killed > Stopping qmi\_ip: no qmi\_ip\_multiclient found; none killed > Stopping netmgrd: stopped netmgrd (pid 1218) > done > Stopping qmuxd: stopped qmuxd (pid 1161) > done > no QCMAP\_ConnectionManager found; none killed > Stopping fs-scrub-daemon: no fs-scrub-daemon found; none killed > Stopping thermal-engine: stopped thermal-engine (pid 1168) > done > stopped qti (pid 1421) > Stopping reboot daemon: stopped reboot-daemon (pid 1105) > done > [24686.026410] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x081343c8 OPER:0x00000090 > Legato shutdown sequence > Stopping Legato… > DONE. > Finished Legato stop Sequence > stopping time daemon > Stopping time\_services: stopped time\_daemon (pid 637) > done > stopping ntpd > no ntpd found; none killed > Stopping diagrebootapp: stopped diagrebootapp (pid 624) > done > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1395) > done. > Deconfiguring network interfaces… no ntpd found; none killed > done. > Stopping syslogd/klogd: stopped syslogd (pid 604) > stopped klogd (pid 614) > done > Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 1360) > dropbear. > K96mount\_unionfs: RO rootfs fudge allowed. > Stopping system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/K98mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > K98mount\_early: Executing mount\_early\_user\_stop… > K98mount\_early: RO rootfs fudge allowed. > sh: /mnt/flash: unknown operand > K98mount\_early: Executing mount\_early\_legato\_stop… > Can’t get valid SMEM, init DSSD SMEM > Linux sub system 1 > K98mount\_early: Executing mount\_early\_userrw\_stop… > rcK: Executing kill\_all\_proc… > rcK: Executing umount\_fs\_generic… > rcK: Executing print\_shutdown\_msg… > \*\* SYSTEM SHUTDOWN COMPLETE \*\* > The system is going down NOW! > Sent SIGTERM to all processes > [24690.400755] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > [24690.420528] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > Sent SIGKILL to all processes > Requesting system reboot > [24692.369862] reboot: Restarting system > [24692.373450] Failed to disable secure wdog debug: -4 > [24692.377369] Calling SCM to disable SPMI PMI#▒oid Bootloader - UART\_DM Initialized!!! > [10] Qseecom Init Done in Appsbl > [10] secure app region addr=0x87900000 size=0x280000[10] TZ App region notif returned with status:0 addr:87900000 size:2621440 > [20] TZ App log region register returned with status:0 addr:82675000 size:4096 > [30] Qseecom TZ Init Done in Appsbl > [30] ERROR: No devinfo partition found > [30] Neither ‘config’ nor ‘frp’ partition found > [40] ERROR: No misc partition found > [1100] SSMEM init OK[1100] ssmem\_get: region 20 not exists[1190] DEBUG: cmdline has root= > [1310] Channel alloc freed > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] MPM 1 irq mapping errored -517 > [0.215708] spmi\_pmic\_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 > [0.231238] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.234383] smd\_channel\_probe\_now: allocation table not initialized > [0.242149] msm\_thermal:msm\_thermal\_dev\_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 > [0.270259] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.273263] msm\_thermal:get\_kernel\_cluster\_info CPU0 topology not initialized. > [0.274153] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274170] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.274878] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274895] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.274912] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274924] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.369879] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready. > [0.371765] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.[0.371957] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0d1300c8 OPER:0x00000090 > [0.373849] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > [0.422521] swimcu\_appl\_psm\_duration\_get: return status 0 > [0.422548] swimcu\_pm\_rtc\_restore: invalid PSM elapsed time: 0 > [0.447574] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:3 tx:1) mode:FIFO slv\_addr:0x22 MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.447646] pca953x 4-0022: failed reading register > [0.448714] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv\_addr:0x1a MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.448784] wm8944 4-001a: Failed to read ID register > [0.452799] msm\_bus\_fabric\_init\_driver > [0.467301] SWI ssmem\_framework\_init: SSMEM init OK > [0.656285] scm\_call failed with error code -4 > [0.656306] msm\_audio\_protect\_memory\_region: SCM call failed, scm\_call\_ret -95 tz\_resp 0 > [0.661881] uart\_tx\_gpio is not available > [0.661901] uart\_rx\_gpio is not available > [0.661921] uart\_cts\_gpio is not available > [0.661941] uart\_rfr\_gpio is not available > [0.662789] AXI: get\_pdata(): Error: Client name not found > [0.662799] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.662807] msm\_serial\_hsl\_probe: Bus scaling is disabled > [0.928401] AXI: get\_pdata(): Error: Client name not found > [0.933197] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.942627] msm\_serial\_hsl\_probe: Bus scaling is disabled > [1.000698] sps: BAM device 0x07984000 is not registered yet. > [1.081603] unable to find DT imem DLOAD mode node > [1.085697] unable to find DT imem EDLOAD mode node > [1.090690] unable to find DT imem dload-type node > [1.095182] Failed to disable secure wdog debug: -4 > [1.127150] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information. > [1.135271] sdhci\_msm 7864900.sdhci: sdhci\_msm\_pm\_qos\_parse\_irq: error -22 reading irq cpu > [1.144282] coresight\_event: error registering on panic -38 > [1.153687] coresight-tmc 6025000.tmc: failed to get flush cti > [1.158485] coresight-tmc 6025000.tmc: failed to get reset cti > [1.226157] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.247658] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.255575] wl12xx GPIO: 131 > [1.273201] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.296747] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.305878] calculate\_residency: residency \< 0 for LPM > [1.309975] parse\_cpu\_levels: idx 1 420 > [1.325748] calculate\_residency: residency \< 0 for LPM > [1.329855] parse\_cpu\_levels: idx 2 500 > [1.340138] parse\_cpu\_levels: idx 2 3040 > [1.344074] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.361289] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > cat: can’t open ‘/sys/class/gpio/gpiochip996/label’: No such file or directory > sh: tca6416: unknown operand > cat: can’t open ‘/sys/class/gpio/gpiochip988/label’: No such file or directory > sh: tca6424: unknown operand > ima: setting up IMA subsystem… > ima: feature not supported > The proc node does not exist > mount root fs from partition (rootfs|system) > Non-secure. > [1.543423] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > [1.995495] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > rootfs roothash: 681542d6bab41e8c2f7ddfb6edae36f844b0fb67b38b61a4f789fa7e57e550c1 > rootfs: dev ‘/dev/ubiblock0\_0’ ‘squashfs’ > mount /dev/mapper/rt > rootfs: mounting took 0ms > init started: BusyBox v1.24.1 (2019-01-29 10:47:12 PST) > /etc/init.d/rcS: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing mount\_essential\_fs… > rcS: Executing simple\_network… > rcS: Executing check\_recovery… > /etc/init.d/factory\_default\_recovery.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing run\_S\_scripts… > /etc/rcS.d/S02mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S02mount\_early: Executing mount\_early\_pseudo… > S02mount\_early: Executing mount\_early\_other… > S02mount\_early: Executing mount\_early\_create\_dirs… > S02mount\_early: Executing yaffs2\_kern\_supported\_init… > S02mount\_early: Executing mount\_early\_user\_start… > S02mount\_early: RO rootfs fudge allowed. > S02mount\_early: User is forcing userapp file system to be ubifs. > S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options… > UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/flash > S02mount\_early: UBIFS volume successfully mounted on /mnt/flash > S02mount\_early: Executing mount\_early\_legato\_start… > sh: 200: unknown operand > mount Legato from partition lefwkro > S02mount\_early: Non-secure. > UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: SQUASHFS successfully mounted on /mnt/legato > S02mount\_early: Executing mount\_early\_userrw\_start… > S02mount\_early: Mounting swirw file system as UBIFS > S02mount\_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options… > UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/userrw > S02mount\_early: UBIFS volume successfully mounted on /mnt/userrw > S02mount\_early: swirw mounted to /mnt/userrw > /etc/rcS.d/S03confighw.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S03confighw.sh: Kernel internal entropy pool filler is available, increasing write\_wakeup\_threshold to 3072 > chown: unknown user messagebus > chgrp: unknown group messagebus > Starting system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/S07mount\_unionfs: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S07mount\_unionfs: RO rootfs fudge allowed. > S07mount\_unionfs: Overlay over /etc is allowed > Mounting local filesystems… > [8.580478] UBIFS error (pid: 488): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device > sh: 200: unknown operand > mount modem from partition modem > MTD : Detected block device : /firmware for modem > > UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > Initializing random number generator… > Switching to composition sierra\_dev (1199:68C0) > [9.257964] enable\_store: android\_usb: already disabled > microcom: can’t open ‘/dev/ttyAT’: No such device > Configuring network interfaces… [9.870748] gbam\_connect\_work: gbam\_connect\_work: Bam channel is not ready > done. > [9.954818] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not open > [9.963958] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not openStarting syslogd/klogd: done > Starting diagrebootapp: done > $Starting qcom\_time: > starting time-daemon > Starting time\_services: done > Legato start sequence > restart\_at\_uart: NO UART map for AT service > start\_at\_cmux\_le: Starting DS\_MUX: > start\_at\_cmux\_le: UART1\_SERVICE=APP > start\_at\_cmux\_le: DS\_MUX daemon on USB > start\_at\_cmux\_le: Done start\_at\_cmux\_le script. > update-ld-cache: Removing stale mount [/etc/ld.so.conf]… > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]… > update-ld-cache: Updating /etc/ld.so.cache … > [12.449385] i2c-msm-v2 78b8000.i2c: msm\_bus\_scale\_register\_client(mstr-id:86):0xb (ok) > [12.511206] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > [14.863954] M-Notify: General: 7 > [14.877143] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL5 → MultiMedia5 → TERT\_MI2S\_RX Audio Mixer > [14.973688] diag: In diag\_send\_feature\_mask\_update, control channel is not open, p: 0, c0fe3904 > [15.153528] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL8 → MultiMedia8 → TERT\_MI2S\_RX Audio Mixer > [16.081372] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT\_FM\_TX → INTERNAL\_FM\_TX → SEC\_MI2S\_RX Port Mixer > [17.863546] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL28 > [17.899632] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer → direct → MM\_UL28 > [17.961637] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL29 > [17.969053] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer → direct → MM\_UL29 > [18.053766] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1\_DL → VoiceMMode1 → SEC\_MI2S\_RX\_Voice Mixer > [18.117769] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2\_DL → VoiceMMode2 → SEC\_MI2S\_RX\_Voice Mixer > [18.204089] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.284468] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.350976] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.359606] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.486362] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.555862] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.623894] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.657973] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.702888] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.743819] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.766919] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.789340] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.838556] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.897402] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.939252] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.982493] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [19.041480] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL3 MUX > [19.100894] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL3 MUX → direct → MM\_UL3 > [19.150643] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL28 MUX > [19.159448] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL28 MUX → direct → MM\_UL28 > [19.210418] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.219221] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL29 MUX → direct → MM\_UL29 > [19.265423] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → SLIMBUS\_0\_RX Port Mixer > [19.281528] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2\_STUB\_DL → Voice2 Stub → INTERNAL\_BT\_SCO\_RX\_Voice Mixer > [19.295598] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY\_MI2S\_TX > [19.303743] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE\_IN → direct → SENARY\_MI2S\_TX > [19.486649] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM\_0\_RX AANC MUX has no paths > [19.507929] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB\_DTMF\_TX > [19.517954] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX → direct → STUB\_DTMF\_TX > [19.530761] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_RX\_CAPTURE\_TX > [19.543121] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE → direct → STUB\_HOST\_RX\_CAPTURE\_TX > [19.559133] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB\_HOST\_RX\_PLAYBACK\_RX > [19.571996] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB\_HOST\_RX\_PLAYBACK\_RX → direct → CS-VOICE HOST RX PLAYBACK > [19.588285] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_TX\_CAPTURE\_TX > [19.600812] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE → direct → STUB\_HOST\_TX\_CAPTURE\_TX > [19.616792] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB\_HOST\_TX\_PLAYBACK\_RX > [19.629712] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB\_HOST\_TX\_PLAYBACK\_RX → direct → CS-VOICE HOST TX PLAYBACK > [19.659352] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTP > [19.666428] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTP → direct → Lineout\_1 amp > [19.676871] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTN > [19.684100] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTN → direct → Lineout\_3 amp > [19.694134] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Mic Bias > [19.701883] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Mic Bias → direct → IN1 > [19.711101] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Headset Mic > [19.719107] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Headset Mic → direct → Mic Bias > [19.729073] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for MCLK > [19.736516] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route MCLK → direct → Mic Bias > Finished Legato start Sequence > [19.939307] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Starting reboot daemon: done > Starting atreset: done > Starting modem dependent daemons: Load modem done > Starting qmuxd: done > Starting thermal-engine: done > Starting irsc\_util: Starting irsc tool > Failed to open file:/etc/sec\_config > Absent/Invalid config,Default rules apply > Ending irsc tool > done > Starting netmgrd: done > Starting fs-scrub-daemon: done > net.ipv4.conf.default.rp\_filter = 1 > net.ipv4.conf.all.rp\_filter = 1 > rm: can’t remove ‘/var/log/wtmp’: No such file or directory > Starting qmi\_ip: done > starting DNS forwarder and DHCP server: dnsmasq… done. > Starting Dropbear SSH server: DONE > cat: can’t open ‘/sys/devices/virtual/android\_usb/android0/f\_ecm/native\_ethaddr’: No such file or directory > dropbear. > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1333) > done. > starting DNS forwarder and DHCP server: dnsmasq… Starting port\_bridge: done > done. > run\_getty.sh: ttyHSL1 reserved for CONSOLE > > Poky (Yocto Project Reference Distro) 2.2.3 fx30 /dev/ttyHSL1 > > fx30 login: [22.624722] adm\_callback: cmd = 0x10322 returned error = 0x16 > [22.629439] adm\_callback: ADM map error, resuming > [22.634611] adm\_memory\_map\_regions: DSP returned error[ADSP\_ERR\_MAX] > [22.640847] adm\_map\_cal\_data: map did not work! cal\_type 0 ret -68 > [22.646629] map\_memory: map\_cal failed, cal type 10, ret = -19! > [22.660218] adm\_alloc\_cal: cal\_utils\_alloc\_block failed, ret = -19, cal type = 10! > [22.666759] call\_allocs: alloc failed! > [39.412422] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0c1300c8 OPER:0x00000090 > [39.746551] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0c1300c8 OPER:0x00000090 Here is the Airvantage info: ![image](https://us1.discourse-cdn.com/flex019/uploads/legato1/original/1X/265a093eef7bb58186befc603a294421609649b1.png) ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 20, 2020, 11:13pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/13 "2020-05-20T23:13:48Z")
Your module seems has problem as i don’t see it undergoes FW update ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 21, 2020, 1:49am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/14 "2020-05-21T01:49:20Z")
Here I tried to SCP the FX30\_WP77xx\_full\_R9.1.1.013-generic.cwe to the /tmp of WP7702 on Mangoh board, after that I typed “fwupdate download /tmp/FX30\_WP77xx\_full\_R9.1.1.013-generic.cwe”, it will undergo Fw update: * * * rcK: Executing run\_K\_scripts… Stopping linkmon: no linkmon found; none killed done Stopping port\_bridge: no port\_bridge found; none killed Stopping qmi\_ip: no qmi\_ip\_multiclient found; none killed Stopping netmgrd: stopped netmgrd (pid 869) done Stopping qmuxd: stopped qmuxd (pid 808) done no QCMAP\_ConnectionManager found; none killed Stopping fs-scrub-daemon: no fs-scrub-daemon found; none killed Stopping thermal-engine: stopped thermal-engine (pid 832) done stopped qti (pid 1000) Stopping reboot daemon: stopped reboot-daemon (pid 729) done Legato shutdown sequence Stopping Legato. DONE. Finished Legato stop Sequence stopping time daemon Stopping time\_services: stopped time\_daemon (pid 592) done stopping ntpd no ntpd found; none killed Stopping diagrebootapp: stopped diagrebootapp (pid 577) done stopping DNS forwarder and DHCP server: dnsmasq… no /usr/bin/dnsmasq found; none killed Deconfiguring network interfaces… no ntpd found; none killed Stopping syslogd/klogd: stopped syslogd (pid 563) stopped klogd (pid 572) done Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 953) dropbear. K96mount\_unionfs: RO rootfs fudge allowed. Stopping system message bus: dbus. K98mount\_early: Executing mount\_early\_user\_stop… K98mount\_early: RO rootfs fudge allowed. sh: /mnt/flash: unknown operand K98mount\_early: Executing mount\_early\_legato\_stop… K98mount\_early: Executing mount\_early\_userrw\_stop… rcK: Executing kill\_all\_proc… rcK: Executing umount\_fs\_generic… rcK: Executing print\_shutdown\_msg… \*\* SYSTEM SHUTDOWN COMPLETE \*\* The system is going down NOW! Sent SIGTERM to all processes [738.372503] ch\_notify on a closed smd\_pkt\_dev id:2 [738.378339] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet0 [738.478135] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data0 [738.543647] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet0 [738.589907] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data0 [738.650463] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data1 [738.731519] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 [738.780555] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data1 [738.788029] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data2 [738.870978] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 [738.910662] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data2 [738.918194] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data3 [738.970267] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister rmnet\_data3 Sent SIGKILL to all processes Requesting system reboot [740.374593] reboot: Restarting system [740.378042] Failed to disable secure wdog debug: -4 [740.382104] Calling SCM to disable SPMI PMI Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC\_IMAGE\_VERSION\_STRING=BOOT.BF.3.1.2-00084 S - IMAGE\_VARIANT\_STRING=LAATANAZA S - OEM\_IMAGE\_VERSION\_STRING=jenkins S - Boot Config, 0x000002e1 B - 1216 - PBL, Start B - 3720 - bootable\_media\_detect\_entry, Start B - 4395 - bootable\_media\_detect\_success, Start B - 4400 - elf\_loader\_entry, Start B - 7854 - auth\_hash\_seg\_entry, Start B - 31522 - auth\_hash\_seg\_exit, Start B - 82575 - elf\_segs\_hash\_verify\_entry, Start B - 129577 - PBL, End B - 138043 - SBL1, Start B - 195810 - pm\_device\_init, Start B - 215940 - PM\_SET\_VAL:Skip D - 18452 - pm\_device\_init, Delta B - 217282 - boot\_config\_data\_table\_init, Start D - 0 - boot\_config\_data\_table\_init, Delta - (0 Bytes) B - 226035 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129 B - 232928 - sbl1\_ddr\_set\_params, Start B - 236771 - Pre\_DDR\_clock\_init, Start D - 213 - Pre\_DDR\_clock\_init, Delta D - 0 - sbl1\_ddr\_set\_params, Delta B - 249459 - pm\_driver\_init, Start D - 4483 - pm\_driver\_init, Delta B - 255742 - cpr\_init, Start D - 122 - cpr\_init, Delta B - 260317 - cpr\_cx\_mx\_apc\_vol\_update, Start D - 91 - cpr\_cx\_mx\_apc\_vol\_update, Delta B - 275537 - clock\_init, Start D - 152 - clock\_init, Delta B - 275781 - boot\_flash\_init, Start D - 39375 - boot\_flash\_init, Delta B - 319884 - boot\_flash\_swi\_ddr\_init, Start D - 28944 - boot\_flash\_swi\_ddr\_init, Delta B - 535244 - hw\_family:5, hw\_type:22, hw\_rev:4 B - 536403 - SSMEM init OK B - 557723 - opening partition 0:SWIFOTA B - 25048460 - smart recovery counter cleared B - 29778614 - ssmem\_release: region 20 not exists B - 29778675 - ssmem\_get: region 20 not exists B - 29791180 - ssmem\_get: region 20 not exists B - 36898747 - ssmem\_get: region 20 not exists B - 50711374 - AUTH\_SKIPPED=USER,SLOT\_WRITE=3,COMP=2,STATUS=PASS B - 50718785 Format: Log Type - Time(microsec) - Message - Optional Info Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic S - QC\_IMAGE\_VERSION\_STRING=BOOT.BF.3.1.2-00088 S - IMAGE\_VARIANT\_STRING=LAATANAZA S - OEM\_IMAGE\_VERSION\_STRING=jenkins S - Boot Config, 0x000002e1 B - 1216 - PBL, Start B - 3720 - bootable\_media\_detect\_entry, Start B - 4384 - bootable\_media\_detect\_success, Start B - 4388 - elf\_loader\_entry, Start B - 7842 - auth\_hash\_seg\_entry, Start B - 31508 - auth\_hash\_seg\_exit, Start B - 82894 - elf\_segs\_hash\_verify\_entry, Start B - 129961 - PBL, End B - 138348 - SBL1, Start B - 196145 - pm\_device\_init, Start B - 216306 - PM\_SET\_VAL:Skip D - 18422 - pm\_device\_init, Delta B - 217648 - boot\_config\_data\_table\_init, Start D - 0 - boot\_config\_data\_table\_init, Delta - (0 Bytes) B - 226371 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:129 B - 233264 - sbl1\_ddr\_set\_params, Start B - 237107 - Pre\_DDR\_clock\_init, Start D - 213 - Pre\_DDR\_clock\_init, Delta D - 0 - sbl1\_ddr\_set\_params, Delta B - 249795 - pm\_driver\_init, Start D - 4483 - pm\_driver\_init, Delta * * * root@fx30:~# cm info Device: WP7702 IMEI: 352653090002874 IMEISV: 2 FSN: VU735370521401 Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 MCU Version: 002.009 PRI Part Number (PN): 9907365 PRI Revision: 001.001 Carrier PRI Name: GENERIC Carrier PRI Revision: 001.028\_002 SKU: 1103530 Last Reset Cause: Reset, User Requested Resets Count: Expected: 611 Unexpected: 256 root@fx30:~# root@fx30:~# ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 22, 2020, 9:05am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/15 "2020-05-22T09:05:22Z")
Hi, I tried with an another FX30-Catm that I have and it also fail to update… I found on the fw release not that: “Release 9.1.1.013 is not officially supported in Developer Studio.” I use developer studio only to flash the default FW (with swiflash). Does developer studio can broke fwupdate during the flashing operation? ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 22, 2020, 9:08am UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/16 "2020-05-22T09:08:20Z")
you can transfer the file to /tmp by scp, and use local update command “fwupdate download” on module console. In this way, you don’t need to use Developer studio. What is the return with these commands? at!entercnd=“A710” at!oemauth? ati3 at!impref? ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 22, 2020, 12:05pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/17 "2020-05-22T12:05:26Z")
Usually (on the FX30-3G) I use the fwupdate download but since on the catm this command does nothing (on both my fx-catm), I use developer studio to flash my company fw. Here are the commands output (all commands on the default fw downloaded): root@fx30:~# microcom -s 230400 /dev/ttyAT AT OK at!entercnd=“A710” OK at!oemauth? !OEMAUTH: Disabled OEM cert hash: Not provisioned OK ati3 Manufacturer: Sierra Wireless, Incorporated Model: FX30(WP7702) Revision: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 IMEI: 354723090128967 IMEI SV: 2 FSN: VU933300551310 +GCAP: +CGSM OK at!impref? !IMPREF: preferred fw version: 02.16.06.00 preferred carrier name: GENERIC preferred config name: GENERIC\_001.028\_002 current fw version: 02.16.06.00 current carrier name: GENERIC current config name: GENERIC\_001.028\_002 OK ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 22, 2020, 1:38pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/18 "2020-05-22T13:38:09Z")
What do you mean fwupdate does nothing? What did you see when you type this command? ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 22, 2020, 1:58pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/19 "2020-05-22T13:58:00Z")
I launch an update from the generic fw to the sierra fw (both from the site) to have a real difference between the two fw. > **Terminal Output:** > > root@fx30:~# cm info > Device: FX30(WP7702) > IMEI: 354723090128967 > IMEISV: 2 > FSN: VU933300551310 > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17 :56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17 :56:12 > MCU Version: 002.009 > PRI Part Number (PN): 9907957 > PRI Revision: 001.000 > Carrier PRI Name: GENERIC > Carrier PRI Revision: 001.028\_002 > SKU: 1103882 > Last Reset Cause: Reset, User Requested > Resets Count: Expected: 1 Unexpected: 0 > root@fx30:~# fwupdate download FX30\_WP77xx\_full\_R9.1.1.013-sierra.cwe > Connecting to service … > Connecting to service … > Download started … > Download successful > **UART console output** > > rcK: Executing run\_K\_scripts… > Stopping linkmon: no linkmon found; none killed > done > Stopping port\_bridge: no port\_bridge found; none killed > Stopping qmi\_ip: no qmi\_ip\_multiclient found; none killed > Stopping netmgrd: stopped netmgrd (pid 1224) > done > Stopping qmuxd: stopped qmuxd (pid 1166) > done > no QCMAP\_ConnectionManager found; none killed > Stopping fs-scrub-daemon: no fs-scrub-daemon found; none killed > Stopping thermal-engine: stopped thermal-engine (pid 1172) > done > stopped qti (pid 1424) > Stopping reboot daemon: stopped reboot-daemon (pid 1131) > done > [142.489869] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Legato shutdown sequence > Stopping Legato… > DONE. > Finished Legato stop Sequence > stopping time daemon > Stopping time\_services: stopped time\_daemon (pid 643) > done > stopping ntpd > no ntpd found; none killed > Stopping diagrebootapp: stopped diagrebootapp (pid 628) > done > stopping DNS forwarder and DHCP server: dnsmasq… stopped /usr/bin/dnsmasq (pid 1387) > done. > Deconfiguring network interfaces… no ntpd found; none killed > done. > Stopping syslogd/klogd: stopped syslogd (pid 608) > stopped klogd (pid 613) > done > Stopping Dropbear SSH server: stopped /usr/sbin/dropbear (pid 1371) > dropbear. > K96mount\_unionfs: RO rootfs fudge allowed. > Stopping system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/K98mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > K98mount\_early: Executing mount\_early\_user\_stop… > K98mount\_early: RO rootfs fudge allowed. > sh: /mnt/flash: unknown operand > K98mount\_early: Executing mount\_early\_legato\_stop… > Can’t get valid SMEM, init DSSD SMEM > Linux sub system 1 > K98mount\_early: Executing mount\_early\_userrw\_stop… > rcK: Executing kill\_all\_proc… > rcK: Executing umount\_fs\_generic… > rcK: Executing print\_shutdown\_msg… > \*\* SYSTEM SHUTDOWN COMPLETE \*\* > The system is going down NOW! > Sent SIGTERM to all processes > [146.847431] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > [146.870338] [RMNET:HI] rmnet\_config\_notify\_cb(): Kernel is trying to unregister bridge0 > Sent SIGKILL to all processes > Requesting system reboot > [148.804362] reboot: Restarting system > [148.807845] Failed to disable secure wdog debug: -4 > [148.811874] Calling SCM to disable SPMI PMI▒!▒+▒▒▒▒▒+V▒.▒KHUP▒▒\_DM Initialized!!! > [10] Qseecom Init Done in Appsbl > [10] secure app region addr=0x87900000 size=0x280000[10] TZ App region notif returned with status:0 addr:87900000 size:2621440 > [20] TZ App log region register returned with status:0 addr:82675000 size:4096 > [30] Qseecom TZ Init Done in Appsbl > [30] ERROR: No devinfo partition found > [30] Neither ‘config’ nor ‘frp’ partition found > [40] ERROR: No misc partition found > [1100] SSMEM init OK[1100] ssmem\_get: region 20 not exists[1190] DEBUG: cmdline has root= > [1310] Channel alloc freed > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] GIC CPU mask not found - kernel will fail to boot. > [0.000000] MPM 1 irq mapping errored -517 > [0.215876] spmi\_pmic\_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000 > [0.231388] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.234546] smd\_channel\_probe\_now: allocation table not initialized > [0.242287] msm\_thermal:msm\_thermal\_dev\_probe Failed reading node=/soc/qcom,msm-thermal, key=qcom,online-hotplug-core. err:-517 > [0.270441] msm\_mpm\_dev\_probe(): Cannot get clk resource for XO: -517 > [0.273442] msm\_thermal:get\_kernel\_cluster\_info CPU0 topology not initialized. > [0.274364] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.274382] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.275091] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.275108] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.275124] cpu cpu0: dev\_pm\_opp\_get\_opp\_count: device OPP not found (-19) > [0.275137] msm\_thermal:get\_cpu\_freq\_plan\_len Error reading CPU0 freq table len. error:-19 > [0.369852] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready. > [0.371738] AXI: msm\_bus\_scale\_register\_client(): msm\_bus\_scale\_register\_client: Bus driver not ready.[0.372032] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x0c1300c8 OPER:0x00000090 > [0.420612] swimcu\_appl\_psm\_duration\_get: return status 0 > [0.420641] swimcu\_pm\_rtc\_restore: invalid PSM elapsed time: 0 > [0.445690] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:3 tx:1) mode:FIFO slv\_addr:0x22 MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.445764] pca953x 4-0022: failed reading register > [0.446826] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv\_addr:0x1a MSTR\_STS:0x091343c8 OPER:0x00000010 > [0.446897] wm8944 4-001a: Failed to read ID register > [0.450898] msm\_bus\_fabric\_init\_driver > [0.465388] SWI ssmem\_framework\_init: SSMEM init OK > [0.654442] scm\_call failed with error code -4 > [0.654461] msm\_audio\_protect\_memory\_region: SCM call failed, scm\_call\_ret -95 tz\_resp 0 > [0.659789] uart\_tx\_gpio is not available > [0.659809] uart\_rx\_gpio is not available > [0.659829] uart\_cts\_gpio is not available > [0.659849] uart\_rfr\_gpio is not available > [0.660878] AXI: get\_pdata(): Error: Client name not found > [0.660888] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.660897] msm\_serial\_hsl\_probe: Bus scaling is disabled > [0.910816] AXI: get\_pdata(): Error: Client name not found > [0.915510] AXI: msm\_bus\_cl\_get\_pdata(): client has to provide missing entry for successful registration > [0.925035] msm\_serial\_hsl\_probe: Bus scaling is disabled > [0.982978] sps: BAM device 0x07984000 is not registered yet. > [1.061617] unable to find DT imem DLOAD mode node > [1.065709] unable to find DT imem EDLOAD mode node > [1.070698] unable to find DT imem dload-type node > [1.075191] Failed to disable secure wdog debug: -4 > [1.107146] devfreq soc:qcom,cpubw: Couldn’t update frequency transition information. > [1.115290] sdhci\_msm 7864900.sdhci: sdhci\_msm\_pm\_qos\_parse\_irq: error -22 reading irq cpu > [1.124305] coresight\_event: error registering on panic -38 > [1.133704] coresight-tmc 6025000.tmc: failed to get flush cti > [1.138502] coresight-tmc 6025000.tmc: failed to get reset cti > [1.206411] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.227921] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.235834] wl12xx GPIO: 131 > [1.252950] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.277182] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.286190] calculate\_residency: residency \< 0 for LPM > [1.300231] parse\_cpu\_levels: idx 1 420 > [1.303033] calculate\_residency: residency \< 0 for LPM > [1.310326] parse\_cpu\_levels: idx 2 500 > [1.313130] parse\_cpu\_levels: idx 2 3040 > [1.318051] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > [1.343896] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > cat: can’t open ‘/sys/class/gpio/gpiochip996/label’: No such file or directory > sh: tca6416: unknown operand > cat: can’t open ‘/sys/class/gpio/gpiochip988/label’: No such file or directory > sh: tca6424: unknown operand > ima: setting up IMA subsystem… > ima: feature not supported > The proc node does not exist > mount root fs from partition (rootfs|system) > Non-secure. > [1.523513] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > UBI device number 0, total 120 LEBs (30474240 bytes, 29.1 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > [1.975581] mdm9607-asoc-snd soc:sound-wm8944: Defering mdm\_asoc\_machine\_probe, q6\_state 0 > rootfs roothash: 681542d6bab41e8c2f7ddfb6edae36f844b0fb67b38b61a4f789fa7e57e550c1 > rootfs: dev ‘/dev/ubiblock0\_0’ ‘squashfs’ > mount /dev/mapper/rt > rootfs: mounting took 0ms > init started: BusyBox v1.24.1 (2019-01-29 10:47:12 PST) > /etc/init.d/rcS: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing mount\_essential\_fs… > rcS: Executing simple\_network… > rcS: Executing check\_recovery… > /etc/init.d/factory\_default\_recovery.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > rcS: Executing run\_S\_scripts… > /etc/rcS.d/S02mount\_early: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S02mount\_early: Executing mount\_early\_pseudo… > S02mount\_early: Executing mount\_early\_other… > S02mount\_early: Executing mount\_early\_create\_dirs… > S02mount\_early: Executing yaffs2\_kern\_supported\_init… > S02mount\_early: Executing mount\_early\_user\_start… > S02mount\_early: RO rootfs fudge allowed. > S02mount\_early: User is forcing userapp file system to be ubifs. > S02mount\_early: Trying to mount UBIFS on /mnt/flash using [usrquota,grpquota,rw] mount options… > UBI device number 3, total 524 LEBs (133070848 bytes, 126.9 MiB), available 5 LEBs (1269760 bytes, 1.2 MiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/flash > S02mount\_early: UBIFS volume successfully mounted on /mnt/flash > S02mount\_early: Executing mount\_early\_legato\_start… > sh: 200: unknown operand > mount Legato from partition lefwkro > S02mount\_early: Non-secure. > UBI device number 2, total 35 LEBs (8888320 bytes, 8.5 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: SQUASHFS successfully mounted on /mnt/legato > S02mount\_early: Executing mount\_early\_userrw\_start… > S02mount\_early: Mounting swirw file system as UBIFS > S02mount\_early: Trying to mount UBIFS on /mnt/userrw using [usrquota,grpquota,rw] mount options… > UBI device number 4, total 100 LEBs (25395200 bytes, 24.2 MiB), available 2 LEBs (507904 bytes, 496.0 KiB), LEB size 253952 bytes (248.0 KiB) > S02mount\_early: Performing quota check on file system mounted at /mnt/userrw > S02mount\_early: UBIFS volume successfully mounted on /mnt/userrw > S02mount\_early: swirw mounted to /mnt/userrw > /etc/rcS.d/S03confighw.sh: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S03confighw.sh: Kernel internal entropy pool filler is available, increasing write\_wakeup\_threshold to 3072 > chown: unknown user messagebus > chgrp: unknown group messagebus > Starting system message bus: start-stop-daemon: unknown user messagebus > dbus. > /etc/rcS.d/S07mount\_unionfs: /etc/run.env: line 168: can’t create /etc/hostname: Read-only file system > S07mount\_unionfs: RO rootfs fudge allowed. > S07mount\_unionfs: Overlay over /etc is allowed > Mounting local filesystems… > [8.392303] UBIFS error (pid: 488): cannot open “ubi0:usrfs”, error -19mount: mounting ubi0:usrfs on /usr failed: No such device > sh: 200: unknown operand > mount modem from partition modem > MTD : Detected block device : /firmware for modem > > UBI device number 1, total 128 LEBs (32505856 bytes, 31.0 MiB), available 0 LEBs (0 bytes), LEB size 253952 bytes (248.0 KiB) > Initializing random number generator… > Switching to composition sierra\_dev (1199:68C0) > [9.084275] enable\_store: android\_usb: already disabled > microcom: can’t open ‘/dev/ttyAT’: No such device > Configuring network interfaces… [9.702225] gbam\_connect\_work: gbam\_connect\_work: Bam channel is not ready > [9.783438] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not open > [9.791662] qti\_ctrl\_queue\_notify: qti\_ctrl\_queue\_notify: rmnet ctrl file handler cd6849c0 is not opendone. > Starting syslogd/klogd: done > Starting diagrebootapp: done > $Starting qcom\_time: > starting time-daemon > Starting time\_services: done > Legato start sequence > start\_at\_cmux\_le: Starting DS\_MUX: > start\_at\_cmux\_le: UART1\_SERVICE=APP > restart\_at\_uart: NO UART map for AT service > start\_at\_cmux\_le: DS\_MUX daemon on USB > start\_at\_cmux\_le: Done start\_at\_cmux\_le script. > update-ld-cache: Removing stale mount [/etc/ld.so.conf]… > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > update-ld-cache: Updating ld.so.cache using [/legato/systems/current/lib]… > update-ld-cache: Updating /etc/ld.so.cache … > [11.801620] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.809577] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.817592] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.825603] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.833598] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.841622] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.849572] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.857590] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [11.865591] smsc95xx 1-1.1:1.0 eth0: kevent 4 may have been dropped > [12.366863] i2c-msm-v2 78b8000.i2c: msm\_bus\_scale\_register\_client(mstr-id:86):0xb (ok) > [12.423476] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > update-ld-cache: Removing stale mount [/etc/ld.so.cache]… > cp: can’t stat ‘/etc/resolv.conf’: No such file or directory > mount: mounting /tmp/resolv.conf on /etc/resolv.conf failed: No such file or directory > [14.679533] M-Notify: General: 7 > [14.697024] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL5 → MultiMedia5 → TERT\_MI2S\_RX Audio Mixer > [14.740610] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MM\_DL8 → MultiMedia8 → TERT\_MI2S\_RX Audio Mixer > [14.765499] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route INT\_FM\_TX → INTERNAL\_FM\_TX → SEC\_MI2S\_RX Port Mixer > [14.819230] diag: In diag\_send\_feature\_mask\_update, control channel is not open, p: 0, c0fe3904 > [14.874637] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL28 > [15.270177] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia28 Mixer → direct → MM\_UL28 > [16.514896] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for MM\_UL29 > [17.345074] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route MultiMedia29 Mixer → direct → MM\_UL29 > [17.816070] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE1\_DL → VoiceMMode1 → SEC\_MI2S\_RX\_Voice Mixer > [17.867037] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICEMMODE2\_DL → VoiceMMode2 → SEC\_MI2S\_RX\_Voice Mixer > [17.915942] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [17.989439] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.056391] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.113188] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.159293] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.201465] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.320933] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL28 MUX > [18.329614] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL28 MUX > [18.481466] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.529934] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route PRI\_MI2S\_TX → PRI\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.586244] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.627741] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.668451] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.701399] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route TERT\_MI2S\_TX → TERT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.752279] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for AUDIO\_REF\_EC\_UL29 MUX > [18.791791] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route QUAT\_MI2S\_TX → QUAT\_MI2S\_TX → AUDIO\_REF\_EC\_UL29 MUX > [18.840464] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL3 MUX > [18.849228] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL3 MUX → direct → MM\_UL3 > [18.962684] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL28 MUX > [19.007669] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL28 MUX → direct → MM\_UL28 > [19.050421] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no source widget found for AUDIO\_REF\_EC\_UL29 MUX > [19.059273] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route AUDIO\_REF\_EC\_UL29 MUX → direct → MM\_UL29 > [19.108913] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route SEC\_MI2S\_TX → SEC\_MI2S\_TX → SLIMBUS\_0\_RX Port Mixer > [19.161193] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route VOICE2\_STUB\_DL → Voice2 Stub → INTERNAL\_BT\_SCO\_RX\_Voice Mixer > [19.188995] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: no sink widget found for SENARY\_MI2S\_TX > [19.209342] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: Failed to add route BE\_IN → direct → SENARY\_MI2S\_TX > [19.367582] msm-pcm-routing soc:qcom,msm-pcm-routing: ASoC: mux SLIM\_0\_RX AANC MUX has no paths > [19.389225] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: no sink widget found for STUB\_DTMF\_TX > [19.402584] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-dtmf-tx: ASoC: Failed to add route DTMF TX → direct → STUB\_DTMF\_TX > [19.414338] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_RX\_CAPTURE\_TX > [19.427098] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-capture-tx: ASoC: Failed to add route CS-VOICE HOST RX CAPTURE → direct → STUB\_HOST\_RX\_CAPTURE\_TX > [19.442955] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: no source widget found for STUB\_HOST\_RX\_PLAYBACK\_RX > [19.455943] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-rx-playback-rx: ASoC: Failed to add route STUB\_HOST\_RX\_PLAYBACK\_RX → direct → CS-VOICE HOST RX PLAYBACK > [19.472159] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: no sink widget found for STUB\_HOST\_TX\_CAPTURE\_TX > [19.484889] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-capture-tx: ASoC: Failed to add route CS-VOICE HOST TX CAPTURE → direct → STUB\_HOST\_TX\_CAPTURE\_TX > [19.500589] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: no source widget found for STUB\_HOST\_TX\_PLAYBACK\_RX > [19.513770] msm-dai-stub-dev soc:qcom,msm-dai-stub:qcom,msm-dai-stub-host-tx-playback-rx: ASoC: Failed to add route STUB\_HOST\_TX\_PLAYBACK\_RX → direct → CS-VOICE HOST TX PLAYBACK > [19.544358] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTP > [19.551634] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTP → direct → Lineout\_1 amp > [19.561567] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for SPKOUTN > [19.569145] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route SPKOUTN → direct → Lineout\_3 amp > [19.579398] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Mic Bias > [19.588141] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Mic Bias → direct → IN1 > [19.598560] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for Headset Mic > [19.606115] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route Headset Mic → direct → Mic Bias > [19.616029] mdm9607-asoc-snd soc:sound-wm8944: ASoC: no source widget found for MCLK > [19.623470] mdm9607-asoc-snd soc:sound-wm8944: ASoC: Failed to add route MCLK → direct → Mic Bias > Finished Legato start Sequence > [19.872803] i2c-msm-v2 78b8000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:18) mode:FIFO slv\_addr:0x3a MSTR\_STS:0x001363c8 OPER:0x00000090 > Starting reboot daemon: done > Starting atreset: done > Starting modem dependent daemons: Load modem done > Starting qmuxd: done > Starting thermal-engine: done > Starting irsc\_util: Starting irsc tool > Failed to open file:/etc/sec\_config > Absent/Invalid config,Default rules apply > Ending irsc tool > done > Starting netmgrd: done > Starting fs-scrub-daemon: done > net.ipv4.conf.default.rp\_filter = 1 > net.ipv4.conf.all.rp\_filter = 1 > rm: can’t remove ‘/var/log/wtmp’: No such file or directory > Starting qmi\_ip: done > starting DNS forwarder and DHCP server: dnsmasq… done. > Starting Dropbear SSH server: DONE > dropbear. > cat: can’t open ‘/sys/devices/virtual/android\_usb/android0/f\_ecm/native\_ethaddr’: No such file or directory > stopping DNS forwarder and DHCP server: dnsmasq… Starting port\_bridge: stopped /usr/bin/dnsmasq (pid 1332) > done. > starting DNS forwarder and DHCP server: dnsmasq… done > done. > run\_getty.sh: ttyHSL1 reserved for CONSOLE > > Poky (Yocto Project Reference Distro) 2.2.3 fx30 /dev/ttyHSL1 > > fx30 login: [22.491303] adm\_callback: cmd = 0x10322 returned error = 0x16 > [22.496019] adm\_callback: ADM map error, resuming > [22.505036] adm\_memory\_map\_regions: DSP returned error[ADSP\_ERR\_MAX] > [22.520507] adm\_map\_cal\_data: map did not work! cal\_type 0 ret -68 > [22.525659] map\_memory: map\_cal failed, cal type 10, ret = -19! > [22.550201] adm\_alloc\_cal: cal\_utils\_alloc\_block failed, ret = -19, cal type = 10! > [22.564550] call\_allocs: alloc failed! And after the reboot I get this (still the same fw): > **After reboot terminal** > > root@fx30:~# cm info > Device: FX30(WP7702) > IMEI: 354723090128967 > IMEISV: 2 > FSN: VU933300551310 > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > MCU Version: 002.009 > PRI Part Number (PN): 9907957 > PRI Revision: 001.000 > Carrier PRI Name: GENERIC > Carrier PRI Revision: 001.028\_002 > SKU: 1103882 > Last Reset Cause: Reset, User Requested > Resets Count: Expected: 4 Unexpected: 0 > root@fx30:~# fwupdate checkStatus > Connecting to service … > Update status: OK. > root@fx30:~# fwupdate query > Connecting to service … > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Linux Version: 3.18.44 #2 PREEMPT Tue Jan 29 11:21:07 PST 2019 > FX30 Version: R9.1.1.013 I say fwupdate do nothing because it doesn’t want to update the firmware and doesn’t show any error. ---
**Author:** ![jyijyi](https://sea1.discourse-cdn.com/flex019/user_avatar/forum.legato.io/jyijyi/32/822_2.png) [@jyijyi](https://forum.legato.io/u/jyijyi)\ **Post date:** [May 22, 2020, 3:35pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/20 "2020-05-22T15:35:42Z")
Didn’t this already show fw update to the new one? root@fx30:~# fwupdate query Connecting to service … Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 Linux Version: 3.18.44 #2 PREEMPT Tue Jan 29 11:21:07 PST 2019 FX30 Version: R9.1.1.013 ---
**Author:** ![g.amaudric](https://avatars.discourse-cdn.com/v4/letter/g/e36b37/32.png) [@g.amaudric](https://forum.legato.io/u/g.amaudric)\ **Post date:** [May 22, 2020, 3:50pm UTC](https://forum.legato.io/t/fwupdate-doesnt-work/5190/21 "2020-05-22T15:50:38Z")
As you can see on the trace below (from the generic to the sierra), the fwupdate query is the same and the cm info output “GENERIC” instead of “SIERRA”. > **GenericToSierra** > > root@fx30:~# fwupdate query > Connecting to service … > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Linux Version: 3.18.44 #2 PREEMPT Tue Jan 29 11:21:07 PST 2019 > FX30 Version: R9.1.1.013 > > root@fx30:~# fwupdate download /tmp/FX30\_WP77xx\_full\_R9.1.1.013-sierra.cwe > Connecting to service … > Connecting to service … > Download started … > Download successful > root@fx30:~# cm info > root@fx30:~# > login as: root > [root@192.168.2.2](mailto:root@192.168.2.2)’s password: > root@fx30:~# fwupdate query > Connecting to service … > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Linux Version: 3.18.44 #2 PREEMPT Tue Jan 29 11:21:07 PST 2019 > FX30 Version: R9.1.1.013 > > root@fx30:~# cm info > Device: FX30(WP7702) > IMEI: 354723090128967 > IMEISV: 2 > FSN: VU933300551310 > Firmware Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > Bootloader Version: SWI9X06Y\_02.16.06.00 7605a6 jenkins 2018/06/20 17:56:12 > MCU Version: 002.009 > PRI Part Number (PN): 9907957 > PRI Revision: 001.000 > Carrier PRI Name: GENERIC > Carrier PRI Revision: 001.028\_002 > SKU: 1103882 > Last Reset Cause: Reset, User Requested > Resets Count: Expected: 2 Unexpected: 0 > root@fx30:~# [Next page](https://forum.legato.io/t/fwupdate-doesnt-work/5190.md?page=2)