# Building SDK using yocto and compile package in .ipk format **URL:** https://forum.legato.io/t/building-sdk-using-yocto-and-compile-package-in-ipk-format/2339 **Category:** Legato Linux distribution (Yocto project) **Created:** [February 9, 2017, 11:00am UTC](https://forum.legato.io/t/building-sdk-using-yocto-and-compile-package-in-ipk-format/2339 "2017-02-09T11:00:10Z") **Posts on this page:** 1 **Page:** 1
### Author: ![bharathgk](https://avatars.discourse-cdn.com/v4/letter/b/94ad74/32.png) [@bharathgk](https://forum.legato.io/u/bharathgk) #### Post date: [February 9, 2017, 11:00am UTC](https://forum.legato.io/t/building-sdk-using-yocto-and-compile-package-in-ipk-format/2339/1 "2017-02-09T11:00:10Z")
Hi All, I’am trying build SDK using yocto, which will include all the external packages i have addded e.g libconfig, mosquitto etc. After building sdk, i want to compile my application software in “ **ipk** ” format, which will be handled by opkg manager, as in ‘openwrt’ environment. # for that i have followed below steps to compile sdk $ cd yocto/build\_bin $ source ../poky/oe-init-build-env . # $ bitbake mdm9x15-image-minimal -c populate\_sdk ## am getting below error: **START** :================================================================================================================== /yocto/build\_bin$ bitbake mdm9x15-image-minimal -c populate\_sdk Loading cache: 100% |##########################################################################################################| ETA: 00:00:00 Loaded 2148 entries from dependency cache. Parsing recipes: 100% |########################################################################################################| Time: 00:00:02 Parsing of 1654 .bb files complete (1652 cached, 2 parsed). 2148 targets, 200 skipped, 0 masked, 0 errors. NOTE: Resolving any missing task queue dependencies Build Configuration: BB\_VERSION = “1.24.0” BUILD\_SYS = “x86\_64-linux” NATIVELSBSTRING = “Ubuntu-12.04” TARGET\_SYS = “arm-poky-linux-gnueabi” MACHINE = “swi-mdm9x15” DISTRO = “poky-swi-ext” DISTRO\_VERSION = “1.7.3” TUNE\_FEATURES = “arm armv7a vfp neon” TARGET\_FPU = “vfp-neon” meta meta-yocto meta-yocto-bsp = “(nobranch):c282df8993828bd7b1d50cfcf637a477eaf481a1” meta-swiflu = “:” meta-nodejs = “master:3c2d7b61ba45436c6c62d60555cd91370a7ad1a2” meta-nodejs-contrib = “master:be99cba0c6fcfb1ba7e85d3446f2a806ae7c3da2” meta-mangoh = “(nobranch):b58ad3c6a4e4d0f2d563e8af86c46f96f8ba3bb6” meta-python meta-networking meta-oe = “(nobranch):70beecb2716bca1b9dfbc7d6a264233e1f05e82b” meta-swi meta-swi-mdm9xxx meta-swi-mdm9x15 = “master:0f1bf8d6d24d7389168eafead6c2f2bede345d18” meta-swi-extras meta-swi-bin = “master:6f65f78f6e8a1801ae7cd424191f3513457e4bbe” meta-openwrt-master = “:” NOTE: Preparing runqueue NOTE: Executing SetScene Tasks NOTE: Executing RunQueue Tasks ERROR: Function failed: do\_configure (log file is located at /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-autoconf/2.69-r11/temp/log.do\_configure.15266) ERROR: Logfile of failure stored in: /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-autoconf/2.69-r11/temp/log.do\_configure.15266 Log data follows: | DEBUG: Executing python function sysroot\_cleansstate | DEBUG: Python function sysroot\_cleansstate finished | DEBUG: SITE files [‘endian-little’, ‘common-linux’, ‘common-glibc’, ‘bit-64’, ‘x86\_64-linux’, ‘common’] | DEBUG: Executing shell function autotools\_preconfigure | DEBUG: Shell function autotools\_preconfigure finished | DEBUG: Executing python function autotools\_copy\_aclocals | DEBUG: Python function autotools\_copy\_aclocals finished | DEBUG: Executing shell function do\_configure | ERROR: no configure script found at /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-autoconf/2.69-r11/autoconf-2.69/configure | WARNING: /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-autoconf/2.69-r11/temp/run.do\_configure.15266:1 exit 1 from | exit 1 | ERROR: Function failed: do\_configure (log file is located at /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-autoconf/2.69-r11/temp/log.do\_configure.15266) ERROR: Task 1700 (virtual:nativesdk:/home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/poky/meta/recipes-devtools/autoconf/autoconf\_2.69.bb, do\_configure) failed with exit code ‘1’ ERROR: Function failed: do\_configure (log file is located at /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-qemu/2.1.0-r0/temp/log.do\_configure.15265) ERROR: Logfile of failure stored in: /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-qemu/2.1.0-r0/temp/log.do\_configure.15265 Log data follows: | DEBUG: Executing python function sysroot\_cleansstate | DEBUG: Python function sysroot\_cleansstate finished | DEBUG: SITE files [‘endian-little’, ‘common-linux’, ‘common-glibc’, ‘bit-64’, ‘x86\_64-linux’, ‘common’] | DEBUG: Executing shell function autotools\_preconfigure | DEBUG: Shell function autotools\_preconfigure finished | DEBUG: Executing python function autotools\_copy\_aclocals | DEBUG: Python function autotools\_copy\_aclocals finished | DEBUG: Executing shell function do\_configure | sed: can’t read Makefile.target: No such file or directory | WARNING: /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-qemu/2.1.0-r0/temp/run.do\_configure.15265:1 exit 2 from | sed -i ‘s/-lX11//g’ Makefile.target | ERROR: Function failed: do\_configure (log file is located at /home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin/tmp/work/x86\_64-nativesdk-pokysdk-linux/nativesdk-qemu/2.1.0-r0/temp/log.do\_configure.15265) ERROR: Task 1756 (virtual:nativesdk:/home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/poky/meta/recipes-devtools/qemu/qemu\_2.1.0.bb, do\_configure) failed with exit code ‘1’ NOTE: Tasks Summary: Attempted 1822 tasks of which 1820 didn’t need to be rerun and 2 failed. Waiting for 0 running tasks to finish: Summary: 2 tasks failed: virtual:nativesdk:/home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/poky/meta/recipes-devtools/autoconf/autoconf\_2.69.bb, do\_configure virtual:nativesdk:/home/onerelysys/Bharath\_WorkSpace/legato/build3\_yocto/yocto/poky/meta/recipes-devtools/qemu/qemu\_2.1.0.bb, do\_configure Summary: There were 2 ERROR messages shown, returning a non-zero exit code. onerelysys@onerelysys:~/Bharath\_WorkSpace/legato/build3\_yocto/yocto/build\_bin$ ================================================================================================================== **END** : so, anybody please help me to solve this problem and to create ipk using sdk. 🙂